NEW SOFTWARE RELEASE
                    ====================


Application:       AXIS Video Motion Detection

Release date:      July 19, 2013

Release type:      Production

Software version:  2.1.2

File name:         AXIS_Video_Motion_Detection.eap

Preceding Release: 2.1 December 15, 2011 

--------------------------------------------------------------------------------

Contact Information
===================

Please contact Axis Communications for product information, updates and support
at http://www.axis.com

--------------------------------------------------------------------------------

Improvements in 2.1.2
===================

I:01: When using HTTPS the message “Failed to get response from server” is shown when entering configuration page.
I:02: Script error when entering VMD’s help page on some firmware's. 

Considerations
===================

CO1:  Do not upgrade from prior versions unless it is really necessary.
      Upgrading from prior version will result to that the application will need to be reconfigured.

Release 2.1.1
===================

2.1.1 Was never released external


Upload instructions
===================

In the supported product's web interface, go to the Applications menu and upload
this application package. Start and configure the application. 
For more instructions see the User's Guide.


Release 2.1
============

Compatible products
===================

* Axis network cameras and video encoders with support for  
  AXIS Camera Application Platform (ACAP). 
* Product firmware must be 5.40 or later.
* See complete list of compatible products at www.axis.com


Dependencies
============

To install and configure AXIS Video Motion Detection, you must have Windows, 
Internet Explorer, and AXIS Media Control (provided by the camera).


Considerations
==============

CO1:  It is not recommended to run AXIS Video Motion Detection at the same time as the
      camera’s built-in motion detection or another Application Packages installed
      in the camera. This may impact behavior and performance of this application.

CO2:  When the application is used with PTZ cameras it will detect motion while PTZ
      is moving. It is possible to suppress these detections by enabling
      [Setup | Video & Audio | Camera Settings | Image freeze on PTZ]
 
C03:  Make sure that the product firmware is 5.40 or later.


Known limitations in version 2.1
================================

KL1:  For multichannel products such as F44 and Q6000 only one channel can be used for 
      Axis Vide Motion Detection. 

KL2:  Enabling Visual confirmation may introduce video latency.
      This latency is a known limitation in AXIS Media Control version 6.1.


Application developer information
=================================

See VAPIX AXIS Video Motion Detection 2.1 API at www.axis.com for more information