FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS P7701 Network Video Decoder

Release date:      2023-09-07

Release type:      Production

Firmware version:  5.07.8

File name:         P7701_5_07_8.bin

Preceding release: 5.07.7

AMC version:       n/a

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


RELEASE 5.07.8
==============
Corrected CVE-2021-43523

RELEASE 5.07.7
==============
Updated libupnp to version 1.6.22

RELEASE 5.07.6
==============

5.07.6 is a production service release for AXIS P7701. This service release
removes the root user's default password in factory defaulted firmware.

The password of the root user must be set first in order to initialize VAPIX
and ONVIF interfaces to allow further configuration.

This change only affects products in its factory defaulted state,
products that are already deployed in production systems are not affected by
this update until factory defaulted.


Known limitations
=================

5.07:L01 Input resolution can be scaled a maximum of 4 times up or down.

5.07:L02 Possible memory leaks with mega-pixel Motion JPEG over RTP due to too high bandwidth requirements for this device to cope.

5.07:L03 Trouble #14410 [AUDIO] No audio with AAC+MJPEG+HTTP

5.07:L04 Trouble #11110 [VIDEO] Bad rtp performace (platoon)

5.07:L05 Trouble #9128  [DEV] RTSP HTTP tunneling protocol violation

5.07:L06 Trouble #14242 [IPV6][VIDEO] rtsp over ipv6

5.07:L07 Trouble #15787 [PARAM] Adding/Importing 200 encoders takes too long

5.07:L08 Trouble #16426 [AUDIO] No G.726 audio over HTTP from video source with 5.00/5.01

5.07:L09 Trouble #15781 [PARAM][WEB] Video&Audio page loads too slow

5.07:L10 Trouble #13872	[LINUX] No error message when using invalid test email in SMTP settings

5.07:L11 Trouble #13778 [VIDEO] OSD doesn't display "No connection to encoder"

5.07:L12 Trouble #20065 [VIDEO] MPEG4 Resolutions larger than D1 with video output smaller than SVGA

5.07:L13 Trouble #20156 [WEB] Password handling of special characters

Application Developer Information
=================================

The AXIS P7701 supports AXIS VAPIX API - Application Programming
Interface version 3. Backwards compatibility is maintained as far as
possible, but some changes have been necessary.

Group             Action
=====             ==========
Encoder.E#.Info   Removed
Encoder.E#        Updated
Network.Info.DHCP Removed
Decoder           Updated

Built in templates for dynamic parameters:

Template               Group
========               =====
'encoder_grp'          Encoder.E#

Supported AXIS VAPIX API Image Resolutions for decoding:

Input Resolution  Exceptions
================  ==========
3MP* - D1	  JPEG only
D1 - 160x120      All resolutions

* 3MP being the biggest verified resolution, larger may work.