FIRMWARE RELEASE NOTE
=====================

Products affected:        Q6075

Release date:             2020-03-09

Release type:             Production

Firmware version:         9.70.1

Preceding release:        9.60.1.2

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade
or howtoupgrade.txt, which is included in the firmware folder.


New features in 9.70.1
================================================================================

9.70.1:F1
Added support for resolve domain name trap addresses in SNMP.

9.70.1:F2
SEI (Supplemental enhancement information) messages is since 9.60.1 included in
recorded H.264 videos.


Features in 9.60.1.2
================================================================================

9.60.1:F1
Added possibility to select stream profile for continuous recordings.

9.60.1:F2
Added possibility to set image rotation in ONVIF media profiles.

9.60.1:F3
Added Geolocation API. See VAPIX documentation for more information.

9.60.1:F4
Added possibility to copy action rules, schedules and recipients.

9.60.1:F5
Updated Video Motion Detection to version 4.4.3.

9.60.1:F6
Updated Motion guard to version 2.2.2.

9.60.1:F7
Updated Fence guard to version 2.2.2.

9.60.1:F8
Updated loitering guard to version 2.2.2.

9.60.1:F9
Updated Orientation Aid PTZ ACAP to version 1.4.1.

9.60.1:F10
Added NTP synchronization status to VAPIX Time API.

9.50.1:F1
Added support for setting image frequency in action rules.

9.50.1:F2
Updated Apache to version 2.4.41 to increase overall minimum cyber security
level.

9.50.1:F3
Updated OpenSSL to version 1.1.1d to increase overall minimum cyber security
level.

9.50.1:F4
Updated Orientation Aid PTZ ACAP to version 1.4.0.

9.50.1:F5
Updated Video Motion Detection to version 4.4.2.

9.50.1:F6
Added possibility to disable the web UI to increase overall minimum cyber
security level. The web UI can be disabled under System -> PlainConfig -> System
-> System Web Interface Disabled. To enable the web UI after it has been
disabled, the VAPIX parameter System.WebInterfaceDisabled must be set to "no".

9.40.1:F1
Added support for H.265 stream profiles to be used in Send Video Clip action
rules.

9.40.1:F2
Added support for search functionality in help files.

9.40.1:F3
Added support for systemready.cgi which will improve re-connection of the
browser to the web-interface after e.g. powercyle or restart of the product.

9.40.1:F4
Added support for average bitrate control (ABR).

9.40.1:F5
Added support for automatic firmware rollback verfication. The user can chose to
select this option prior to performing an firmware upgrade. When chosen, the
product will perform the upgrade and then wait a pre-defined time for the user
to acknowledge the upgrade in the web-interface. If not acknowledged in time,
the product will rollback to its previous firmware.

9.40.1:F6
Added support for the possibility to configure a secondary NTP server in web-
interface under Settings -> System -> Date & Time or via VAPIX Time API.

9.40.1:F7
Removed the root users default password in factory defaulted firmware. The
password of the root user must be set first in order to initialize VAPIX and
ONVIF interfaces to allow further configuration. This change only affects
products in its factory defaulted state, products that are already deployed in
production systems are not affected by this update until factory defaulted. For
more information please see https://www.axis.com/support/faq/FAQ116429.

9.40.1:F8
Added support for uploading custom firmware certificates in the web-interface
under Settings -> System -> Security in order to allow the Axis product to
accept AXIS developer firmware during firmware upgrade.

9.40.1:F9
Updated Video Motion Detection to version 4.4.0.

9.40.1:F10
Updated Motion Guard to version 2.2.0.

9.40.1:F11
Updated Fence Guard to version 2.2.0.

9.40.1:F12
Updated Loitering Guard to version 2.2.0

9.40.1:F13
Added support for millisecond timestamps in JPEG header.

9.30.1:F1
Added an API for mDNS-SD.

9.30.1:F2
TLS1.0 and TLS1.1 is now disabled by default.

9.30.1:F3
Added support for source-specific multicast (SSM) via http://ip-address/axis-
media/ssm/media.amp. The following parameters need to be configured prior to
initiating a video stream via SSM: Network.RTP.R#.VideoAddress
Network.RTP.R#.VideoPort Network.RTP.R#.AudioAdress Network.RTP.R#.AudioPort

9.30.1:F4
Added support for TLSv1.3.

9.30.1:F5
The classic GUI has been deprecated and is now removed to increase overall cyber
security level.

9.30.1:F6
Upgraded Apache to version 2.4.39 to increase overall minimum cyber security
level.

9.30.1:F7
Updated Fence Guard to version 2.1.9.

9.30.1:F8
Updated Video Motion Detection to version 4.3.5.

9.30.1:F9
Updated Loitering Guard to version 2.1.9.

9.30.1:F10
Updated Motion Guard to version 2.1.9.

9.30.1:F11
It is now possible to upload .PFX formatted certificates with a total size of
102400 bytes. The previous limit was 1/10 of it.

9.30.1:F12
Added support for "Wait at least time x" before re-running an configured action
rule.


Corrections in 9.70.1
================================================================================

9.70.1:C1
Improved video streaming robustness in unstable network environments.

9.70.1:C2
Corrected a streaming issue that caused the RTSP server to omit the RTP-info
header on rare occasions.
This correction was already included in 9.60 but was missed in the release
notes.

9.70.1:C3
Improved cyber security by adding the possibility to disable Web-Service
Discovery (WS-Discovery).

9.70.1:C4
Corrected an issue that caused the EAP-START package not to be sent during IEEE
802.1x port authentication upon network link state change.

9.70.1:C5
Corrected an issue that returned a RTSP 400 Bad Request instead of RTSP 551 Not
Supported when calling ONVIF audio back-channel API interface on products with
no support for it.

9.70.1:C6
Corrected an issue that removed information about recipients in the server
report.

9.70.1:C7
Corrected a streaming issue affecting RTSP tunneled via HTTPs.

9.70.1:C8
Corrected an issue with streaming H.264 using Axis T8705 with User Data enabled.

9.70.1:C9
Corrected Vendor class identifier for DHCP negotiation.


Corrections in 9.60.1.2
================================================================================

9.60.1.2:C1
Corrected an issue that caused the camera to be unresponsive and in need of a
factory default when using “Save as pan 0”. This issue was only seen in 9.60.1.

9.60.1:C1
Corrected an issue that caused the HTTP recipient URL to be cropped.

9.60.1:C2
Corrected the following security vulnerabilities: CVE-2019-13377 CVE-2019-16275

9.50.1:C1
Corrected an issue that could cause the web-interface to freeze upon action rule
configuration with Fence Guard.

9.50.1:C2
Improved recording robustness in the event of temporary storage loss.

9.50.1:C3
Increased the limit of concurrent HTTP requests for I/O related VAPIX commands
from 4 to 10.

9.50.1:C4
The deprecated parameter HTTPS.AllowSSLV3 has been removed completely now.

9.50.1:C5
Corrected an issue that could cause the preset reached trigger in the event
system to trigger prior to actually reaching the preset.

9.40.1.3:C1
Corrected an issue that could cause false RAM memory initialisation during boot-
up on rare occasions.

9.40.1:C1
Removed a unecessary warning text for a user when setting up a action rule that
requires a stream profile while it is actually already in place.

9.40.1:C2
Corrected an issue that made it possible to add a action rule recipient without
nice-name via API.

9.30.1:C1
Corrected an issue that prevented the user from exporting recordings when the
camera was configured to Alaska timezone.

9.30.1:C2
Corrected an issue that prevented the user to play recordings as a viewer.

9.30.1:C3
Extended the charater limits for query string suffix in action rules in order to
allow for longer URLs.


Known Bugs/Limitations
================================================================================

9.70.1:L1
When using a VMD 4 event in combination with a connected preset, a refresh of
the VMD 4 configuration page after a camera restart is needed for the event to
work.

9.70.1:L2
It is not possible to upgrade the product from 9.60 to any other release while
having SOCKS proxy configured in the product.

9.40.1:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.30.1.2:L1
There might be features currently explained in the help files that may not be
supported by the camera.

9.30.1.2:L2
Some parts of the web-interface may not be fully translated.


Supported AXIS VAPIX API Image Resolutions for Q6075
================================================================================
Resolution  Exceptions
==========  ==========

1920x1080
1280x720
800x450
480x270
320x180

1280x960    1)
1024x768    1)
1024x576    1)
800x600     1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
640x480     1)
640x360     1)
704x288     1)
480x360     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
320x240     1)
240x180     1)
192x144     1)
176x144     1)
176x120     1)
160x120     1)
160x90      1)
analyze     1)

1) Not visible in web user interface