FIRMWARE RELEASE NOTE ===================== Products affected: AXIS Q1775 Release date: 2017-09-19 Release type: Production Firmware version: 7.30.1 File name: Q1775_7.30.1.bin Preceding release: 7.20.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New features in 7.30.1 since 7.20.1 ================================================================================ 7.30.1:F1 Noise Reduction setting has been added to Settings -> Image. 7.30.1:F2 The FTP Server is now disabled by default as it is not used during normal operation and may pose a security risk.The FTP Server may be enabled during advanced maintenance or troubleshooting in Settings -> System -> PlainConfig -> Network. 7.30.1:F3 Support for Brute Force Delay Protection. The product can block a client for a period of time if too many login attempts failed. Brute Force Delay Protection can be configured under System -> PlainConfig -> System -> System PreventDoSAttack. 7.30.1:F4 Support for automatic license key installation when installing an ACAP under Settings -> Apps. 7.30.1:F5 Support for SRTP (Encrypted Video Streaming) according to RFC 3711. The cameras video stream can be received via secure end-to-end encrypted transportation method only by authorized clients. 7.30.1:F6 A parameter called "Enable the script editor (editcgi)" has been added to plain config -> system section to enable/disable the feature. Editcgi will be removed in future completely and function is considered deprecated. 7.30.1:F7 Support for Adaptive Resolution. Adaptive Resolution is enabled per default and takes only effect when viewing live stream in the web-interface. The viewing client will receive a image resolution that is adapted or close to the viewing clients real display resolution to higher the user experience. 7.30.1:F8 Support for Zipstream Dynamic FPS - Lower Limit Support for Zipstream Dynamic GOP - Upper Limit It is now possible to further adjust and set limits for Dynamic FPS and Dynamic GOP settings and can be configured under Stream settings -> Zipstream. 7.30.1:F9 Support for Flash All/Factory Default while performing a firmware update. It is now possible to select an option that will factory default the camera after a firmware update/downgrade has been performed under Settings -> System -> Maintenance. 7.30.1:F10 Added a link under Settings -> Apps for the user to get fast-access to information about available ACAPs on www.axis.com/products/analytics-and-other- applications. Features in 7.20.1 ================================================================================ 7.20.1:F1 The functionality of enabling Axis DNS Service via control button has been disabled by default. It can be enabled again using VAPIX. 7.20.1:F2 Changed the default web server authentication from Basic and Digest to Digest only. 7.20.1:F3 Upon a factory default, the camera will generate a self-signed certificate at boot and enable HTTPS. This allows clients to use encrypted access from start. If HTTPS is to be used in daily operations, it is recommended to replace the generated self-signed certificate with a CA-signed certificate. 7.20.1:F4 Support for 24bit LPCM audio mode. 7.20.1:F5 OpenSSL has been updated to version 1.0.2k to increase overall minimum cyber security level. 7.20.1:F6 Support for AXIS SD card health API. The SD card health API allows a client to track and request the health and wear-out state of an camera with AXIS Surveillance SD Card. 7.20.1:F7 Pressing "Download the server report" in System -> Maintenance will now automatically attach a snapshot of the image to the .zip file in order to simplify support. 7.10.1:F1 It is now possible to specify image rotation via ONVIF video source configuration 7.10.1:F2 Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled application. 7.10.1:F3 VMD upgraded to version 4.1. 7.10.1:F4 Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3. 7.10.1:F5 New web-interface with improved usability and broader support of web-clients and operating systems. For more information please see https://www.axis.com/global/en/support/technical-notes/browser-support. 7.10.1:F6 The new web-interface supports 12 different pre-installed languages which will be chosen automatically based on browser settings. Uploading individual language files is not needed anymore. Supported Languages: English - German - French - Spanish - Italian - Portugese - Polish - Russian - Japanese - Chinese (Mainland) - Chinese (Taiwan) - Korean Corrections in 7.30.1 since 7.20.1 ================================================================================ 7.30.1:C1 It is now possible to fast forward/rewind to any time in a selected recording using the web interface. 7.30.1:C2 Improved UI controls and more configuration possibilities for "Allow Slow Shutter" under Settings -> Image. 7.30.1:C3 Reduced the waiting time for receiving a video stream significantly when a 2nd client requests a video stream via multicast. 7.30.1:C4 The area zoom functionality has been removed from the web-interface. Area zoom was used to draw a rectangle in the live view to let the camera either mechanical or digital PTZ to its desired position. 7.30.1:C5 Corrected an issue that delivered E-Mails send from the camera with a wrong time stamp in the e-mail header. 7.30.1:C6 Corrected an issue that delivered E-Mails send from the camera with a wrong time zone in the e-mail header. 7.30.1:C7 Corrected an issue with FTP recipients configured with a DNS name instead of a static IP-address which caused the FTP recipient test or action rule to fail. 7.30.1:C8 Fixed a issue that let the recorded video to the computer using the Video Capture button be incorrectly displayed or unusable in some rare occasions. 7.30.1:C9 Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using absolute PAN command. Please use the latest version of the ACAP. 7.30.1:C10 Corrected security vulnerability CVE-2016-2147. 7.30.1:C11 Corrected critical vulnerability ACV-120444. Corrections in 7.20.1 ================================================================================ 7.20.1:C1 Corrected an issue that prevented the user from saving a action rule with a Email Recipient that had SSL enabled. 7.20.1:C2 Apache web server has been updated to version 2.4.25. 7.20.1:C3 Corrected a issue resulting in "503 Service Unavailable" when trying to play a recording from a camera with a specific time range via ONVIF. 7.20.1:C4 Corrected an issue with an additional sign "/" in the absolute upload path of an SFTP Recipient when saving the action rule causing it to not work correctly. 7.20.1:C5 Fixed an issue when an ONVIF client connected to the camera via digest authentication. 7.20.1:C6 Fixed critical vulnerability ACV-116267. 7.20.1:C7 Improved camera stability when recording via ONVIF profile G. 7.10.1:C1 Improved handling of day and night shift levels adjustment. 7.10.1:C2 Improved HTTP image upload stability in unstable networks. 7.10.1:C3 Improved camera stability when metadata is used. 7.10.1:C4 Improved loading of the web-interface in unstable networks. 7.10.1:C5 Improved camera stability when TriggerData is used. 7.10.1:C6 Corrected a bug in the event system that prevented the camera from re-sending the SMTP notification every 10 seconds in case the receiving server reported an error. 7.10.1:C7 Improved stability in actionengine (tcp notification). Known Bugs/Limitations ================================================================================ 7.30.1:L1 Connecting to a camera will fail and result in "Unauthorized" message due to an bug in Microsoft Edge 40 browser. This will be corrected by Microsoft in the next version of Edge 41. 7.30.1:L2 IEEE 802.1x configuration does not work in Microsoft Edge. 7.20.1:L1 Recording streams to SD Card with total bit rate above 12Mbit/sec may cause missing frames/sequences. 7.20.1:L2 The following features in Settings -> System will be displayed in English only as for now: Certificates, ONVIF, HTTPS, IEEE 802.1x, SNMP, Events, Stream profiles and Detectors. The current chosen language will not have any affect there. 7.20.1:L3 It is recommended to perform a factory default after downgrading the cameras firmware if needed. 7.20.1:L4 Features currently explained in the help files may not be supported in the camera. 7.20.1:L5 No audio support when viewing MJPEG video streams directly in the web-interface. However, a recorded video MJPEG video stream from the cameras storage can be played with audio using a 3rd party client e.g. Microsoft Windows Media Player. 7.20.1:L6 Camera is not inserting a new I-frame when a 2nd client requests a video stream via multicast through RTSP which results in additional waiting time before video streaming starts. 7.20.1:L7 Videos that have been recorded using the video capture feature in live view may not be playable some media players (e.g. VLC) as it is in an fragmented MP4 format without total video duration. 7.10.1:L1 Recording streams to SD card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. Supported AXIS VAPIX API Image Resolutions for AXIS Q1775 ================================================================================ Resolution Exceptions ========== ========== 1920x1200 4) 1920x1080 2) 3) 1600x1200 4) 1400x1050 1280x960 1280x800 1280x720 1024x768 1024x640 800x600 854x480 800x500 800x450 640x480 640x400 640x360 480x360 480x300 480x270 320x240 320x200 320x180 240x180 160x120 160x100 160x90 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x144 1) 176x120 1) 80x50 1) 1) Not visible in web user interface 2) 1080p 1920x1080 (16:9) @ 25/30 fps (WDR) 3) 1080p 1920x1080 (16:9) @ 50/60 fps (no WDR) 4) WUXGA 1920x1200 (16:10) @ 25/30 fps (no WDR)