FIRMWARE RELEASE NOTE 
=====================

Products affected: 	AXIS Q1775/-E

Release date: 		2016-04-20 

Release type: 		Production

Firmware version:  	6.20.1.1

File name:         	Q1775_6.20.1.1.bin

Preceding release: 	5.85.3

--------------------------------------------------------------------------------


Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.


New features/improvements in 6.20.1.1 since 5.85.3 firmware
===========================================================

6.20.1.1:F1
Edge storage recording robustness is improved with an automatic database repair 
feature. 

6.20.1.1:F2
Support for the NTCIP ACAP. 

6.20.1.1:F3
SNMP MIB r/w OID values are saved after reboot. 

6.20.1.1:F4
Support for external IR LEDs controlled via ptz auxiliary. 

6.20.1.1:F5
Improved start-up time. 

6.20.1.1:F6
Removed predefined stream profiles: Quality, HDTV, Balanced, Bandwidth, Mobile. 

6.20.1.1:F7
Upgrade OpenSSL to version 1.0.2d. This version also provides support for TLS 1.2. 

6.20.1.1:F8
Added Axis Zipstream technology.


Corrections
============

6.20.1.1:C1
RTSP over TCP may cause choppy video if block size is not optimized or set 
during video connection.  

6.20.1.1:C2
Improved SD card recording handling. 

6.20.1.1:C3
ONVIF users are now handled when PTZ Control Queue is enabled. 

6.20.1.1:C4
Exposure improvements when enabling custom exposure zones 

6.20.1.1:C5
Fine tuning of IR cut filter switch in automatic mode 

6.20.1.1:C6
Preview window is updated when changing Video Stream settings.  

6.20.1.1:C7
Solve network share mount failures at startup. 

6.20.1.1:C8
Improved handling of frequent I/O triggering.  

6.20.1.1:C9
When DST is enabled, export recordings can now be done via web interface. 

6.20.1.1:C10
It is now possible to a select starting point when playing back a recording 
while using multicast and H.264. 

6.20.1.1:C11
PullMessages now follow the ONVIF specification 9.1.2. 

6.20.1.1:C12
Rule is now triggered on startevent/"signal raise" and not on condition. 

6.20.1.1:C13
Users with admin permissions can edit ACAP configuration settings. 

6.20.1.1:C14
Camera is reached through HTTPS when NAT traversal is enabled. 

6.20.1.1:C15
Improved Privacy mask alignment. 

6.20.1.1:C16
Manual triggers for all enabled View Areas are shown. 

6.20.1.1:C17
Improved synchronization between sound and video when having low fps and long 
GOV length. 

6.20.1.1:C18
Product is shutting down PTZ functionalities for safety reason when pan/tilt 
calibration failed too many times. 

6.20.1.1:C19
Improved response performance of GetCompatibleVideoEncoderConfigurations. 

6.20.1.1:C20
Corrected H264 payloader behaviour to now insert PPS/SPS frames before every 
I-frame. This will improve behavior, especially with clients that uses 
multicast. 

6.20.1.1:C21
Corrected image corruption issue seen in corridor format. 

6.20.1.1:C22
Overview map removed when PTZ controls are disabled. 

6.20.1.1:C23
Added ACAP support for NV12 format. 


Known Bugs/Limitations
============

6.20.1.1:L1
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 


Resolution Exceptions
========== ===========

1920x1080
1400x1050
1280x960
1280x800
1280x720
1024x768
1024x640
854x480
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
160x120
160x100
160x90

768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface