FIRMWARE RELEASE NOTE
======================

Products affected: P3719-PLE

Release date:      2020-07-15

Release type:      Production

Firmware version:  9.80.2.2

Preceding release: 9.80.2

--------------------------------------------------------------------------------

This is the LTS 2020 track.

Upgrade recommendations
========================

If you need to step up your firmware several steps, it is recommended to do an
intermediate upgrade to LTS-tracks before proceeding.
For example if the current version is 7.40 and you want to upgrade to 9.80.
Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80.

Upgrade the firmware according to the instructions given in howtoupgrade.txt,
which is included in the firmware folder or at the firmware portal at
https://www.axis.com


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security


Corrections in 9.80.2.2 since 9.80.2
=====================================

9.80.2.2:C01
General improvements to the LTS 2020 platform.

9.80.2.2:C02
Corrected an issue in setcleanupmaxage.cgi that caused changed settings not to be applied
directly.

9.80.2.2:C03
Corrected an issue that caused old recordings to not be removed after their retention
period was expired.

9.80.2.2:C04
Corrected an issue that sometimes caused event triggered recordings to fail.

9.80.2.2:C05
Updated Curl to version 7.69.1 to increase overall cybersecurity level.

9.80.2.2:C06
Corrected an issue that made Digital PTZ malfunction in combination with auto rotation.


Corrections in 9.80.2 since 9.80.1.1
=====================================

9.80.2:C01
General improvements to the LTS 2020 platform.

9.80.2:C02
Corrected an issue in the MQTT Client that caused selected QoS not to be used when
publishing events.

9.80.2:C03
Corrected an issue in the MQTT Client that caused source fields not to be sent.

9.80.2:C04
Updated Apache to version 2.4.43 to increase overall cyber security level.

9.80.2:C05
Update OpenSSL to version 1.1.1g to increase overall cyber security level.

9.80.2:C06
Added possibility to retrieve the device Owner Authentication Key (OAK) in the web GUI.
Note that this functionality requires that the product have direct access to the internet.

9.80.2:C07
Corrected an issue that sometimes made it impossible to edit action rules after upgrade.


Known Bugs/Limitations
================================================================================

9.80.1:L1
When pulling a 90 or 270 degree rotated h.265 video stream from VMS or VLC, a
pink line will be shown in one side of the image.
A workaround is to use either 2560x1440, 1280x960, 1280x720, 1024x768, 1024x576
or 640x480 resolution or rotate stream 0/180 degrees.

9.70.1:L1
It is not possible to upgrade the product from 9.60 to any other release while
having SOCKS proxy configured in the product.

9.45.3:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.45.3:L2
If the product is disconnected while the T61xx is running, the T61xx needs to be
restarted before the product is re-connected.

9.45.3:L3
When a stream is rotated 90 or 270 degrees and mirrored the image gets
corrupted.


Supported AXIS VAPIX API Image Resolutions for P3719-PLE
================================================================================

Resolution    Exceptions
------------  ------------
2560x1440     2)
1920x1080
640x360

2560x1440     1) 2)
1280x960      1)
1280x720      1)
1024x768      1)
1024x576      1)
800x600       1)
640x480       1)


1) Not visible in web user interface
2) Available on Quad channel