FIRMWARE RELEASE NOTE ======================== Products affected: P3719-PLE Release date: 2020-05-11 Release type: Production Firmware version: 9.80.1.1 Preceding release: 9.80.1 -------------------------------------------------------------------------------- Upgrade recommendations ======================== If you need to step up your firmware several steps, it is recommended to do an intermediate upgrade to LTS-tracks before proceeding. For example if the current version is 7.40 and you want to upgrade to 9.70. Then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.70. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or at the firmware portal at https://www.axis.com NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security Features in 9.80.1 ================================================================================ 9.80.1:F1 Added support for disabling the SD card slot in PlainConfig -> Storage -> Storage.S0.Enabled. After change, the camera needs to be restarted. 9.80.1:F2 Added support for Custom Header CGI. It is now possible to customize headers to support e.g. Access-Control-Allow-Origin (CORS) and X-Frame-Options to increase minimum cybersecurity level. Please https://www.axis.com/vapix-library for more information. 9.80.1:F3 Added support for Message Queuing Telemetry Transport protocol (MQTT). The AXIS products acts as a client able to publish its events to a MQTT broker. More information can be found in the VAPIX library at https://www.axis.com/vapix- library/. 9.80.1:F4 Added the functionality to automatically restart ongoing recordings when time in the product is updated significantly. This ensures that the time displayed in text overlays match the timeline. 9.80.1:F5 Updated Video Motion Detection to version 4.4.5. 9.70.1:F1 Added support for ONVIF Profile T. 9.70.1:F2 Added support for resolve domain name trap addresses in SNMP. 9.70.1:F3 SEI (Supplemental enhancement information) messages is since 9.60.1 included in recorded H.264 videos. Corrections in 9.80.1.1 ================================================================================ 9.80.1.1:C1 When Axis Live Privacy Shield i enabled, it is only possible to upgrade to 9.80.1.1 if you are using version 1.2.1 or newer. If an older version of Axis Live Privacy Shield is used, that must be updated before the firmware is upgraded. Corrections in 9.80.1 ================================================================================ 9.80.1:C1 Corrected an issue that caused the device to respond with "false" for WSPullPointSupport during ONVIF Get Capabilities request. 9.80.1:C2 Corrected an issue causing intermittent disconnections to the camera. 9.80.1:C3 Corrected an issue that did not allow the use of an event rule together with Quadview. 9.80.1:C4 Corrected an issue that caused the network settings to reset on rare occasions when the device was power-cycled. 9.70.1.5:C1 Improved system stability. 9.70.1:C1 Improved video streaming robustness in unstable network environments. 9.70.1:C2 Corrected a streaming issue that caused the RTSP server to omit the RTP-info header on rare occasions. This correction was already included in 9.60 but was missed in the release notes. 9.70.1:C3 Improved cyber security by adding the possibility to disable Web-Service Discovery (WS-Discovery). 9.70.1:C4 Corrected an issue that caused the EAP-START package not to be sent during IEEE 802.1x port authentication upon network link state change. 9.70.1:C5 Corrected an issue that removed information about recipients in the server report. 9.70.1:C6 Corrected a streaming issue affecting RTSP tunneled via HTTPs. 9.70.1:C7 Corrected an issue with streaming H.264 using Axis T8705 with User Data enabled. 9.70.1:C8 Corrected Vendor class identifier for DHCP negotiation. 9.45.3:C1 Bandwidth optimizations for H.264 and H.265. 9.45.2:C2 General imaging improvements. 9.45.2:C3 General stability improvements Known Bugs/Limitations ================================================================================ 9.80.1:L1 When pulling a 90 or 270 degree rotated h.265 video stream from VMS or VLC, a pink line will be shown in one side of the image. A workaround is to use either 2560x1440, 1280x960, 1280x720, 1024x768, 1024x576 or 640x480 resolution or rotate stream 0/180 degrees. 9.70.1:L1 It is not possible to upgrade the product from 9.60 to any other release while having SOCKS proxy configured in the product. 9.45.3:L1 There might be event settings available that is not applicable to the product with the current setup. 9.45.3:L2 If the product is disconnected while the T61xx is running, the T61xx needs to be restarted before the product is re-connected. 9.45.3:L3 When a stream is rotated 90 or 270 degrees and mirrored the image gets corrupted. Supported AXIS VAPIX API Image Resolutions for P3719-PLE ================================================================================ Resolution Exceptions ------------ ------------ 2560x1440 2) 1920x1080 640x360 2560x1440 1) 2) 1280x960 1) 1280x720 1) 1024x768 1) 1024x576 1) 800x600 1) 640x480 1) 1) Not visible in web user interface 2) Available on Quad channel