FIRMWARE RELEASE NOTE
=====================

Products affected:        P3719-PLE

Release date:             2020-04-03

Release type:             Production

Firmware version:         9.70.1.5

Preceding release:        9.70.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade
or howtoupgrade.txt, which is included in the firmware folder.


Features in 9.70.1
================================================================================

9.70.1:F1
Added support for ONVIF Profile T.

9.70.1:F2
Added support for resolve domain name trap addresses in SNMP.

9.70.1:F3
SEI (Supplemental enhancement information) messages is since 9.60.1 included in
recorded H.264 videos.


Corrections in 9.70.1.5
================================================================================

9.70.1.5:C1
Improved system stability.


Corrections in 9.70.1
================================================================================

9.70.1:C1
Improved video streaming robustness in unstable network environments.

9.70.1:C2
Corrected a streaming issue that caused the RTSP server to omit the RTP-info
header on rare occasions.
This correction was already included in 9.60 but was missed in the release
notes.

9.70.1:C3
Improved cyber security by adding the possibility to disable Web-Service
Discovery (WS-Discovery).

9.70.1:C4
Corrected an issue that caused the EAP-START package not to be sent during IEEE
802.1x port authentication upon network link state change.

9.70.1:C5
Corrected an issue that removed information about recipients in the server
report.

9.70.1:C6
Corrected a streaming issue affecting RTSP tunneled via HTTPs.

9.70.1:C7
Corrected an issue with streaming H.264 using Axis T8705 with User Data enabled.

9.70.1:C8
Corrected Vendor class identifier for DHCP negotiation.

9.45.3:C1
Bandwidth optimizations for H.264 and H.265.

9.45.2:C2
General imaging improvements.

9.45.2:C3
General stability improvements


Known Bugs/Limitations
================================================================================

9.70.1:L1
It is not possible to upgrade the product from 9.60 to any other release while
having SOCKS proxy configured in the product.

9.45.3:L1
There might be event settings available that is not applicable to the product
with the current setup.

9.45.3:L2
If the product is disconnected while the T61xx is running, the T61xx needs to be
restarted before the product is re-connected.

9.45.3:L3
When a stream is rotated 90 or 270 degrees and mirrored the image gets
corrupted.


Supported AXIS VAPIX API Image Resolutions for P3719-PLE
================================================================================
Resolution  Exceptions
==========  ==========

2560x1440
1920x1080
640x360

2560x1440   1) 2)
1280x960    1)
1280x720    1)
1024x768    1)
1024x576    1)
800x600     1)
640x480     1)

1) Not visible in web user interface
2) Available on Quad channel