FIRMWARE RELEASE NOTE
=====================

Products affected:        AXIS P3224-LV/LVE and AXIS P3225-LV/LVE

Release date:             2016-07-07

Release type:             Production

Firmware version:         6.30.1

File name:                P3224_6.30.1.bin

Preceding release:        6.10.1.1

--------------------------------------------------------------------------------

Upgrade instructions
====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at
http://www.axis.com/support/tecnical-notes/how-to-upgrade,
or howtoupgrade.txt, which is included in the firmware folder.


New Features in 6.30.1 since 6.10.1.1
=====================================

6.30.1:F1
If Network Share is setup to use DNS host name as host and if the IP address
changes after mount, the host name is resolved to current IP address.

6.30.1:F2
Improved Zipstream using dynamic frame rate.

6.30.1:F3
Support for ONVIF Profile G.


Corrections in 6.30.1 since 6.10.1.1
====================================

6.30.1:C1
Fixed a critical security vulnerability.

6.30.1:C2
Access to Zipstream settings is now available to Operators.

6.30.1:C3
From the web gui the rule is now triggered on startevent/"signal raise" and not
on condition.

6.30.1:C4
Camera is reached through HTTPS when NAT traversal is enabled.

6.30.1:C5
Corrected image corruption issue seen in corridor format.

6.30.1:C6
Switch to turn off the network traffic LED now works.

6.30.1:C7
Fixed script error when naming a privacy mask with åäö.

6.30.1:C8
Added ACAP support for NV12 format.

6.30.1:C9
Improved performance in MOTE and ACAP’s when converting from UYVY to
GRAY8(Y800).

6.30.1:C10
If the total bandwidth received from the camera is greater than 90 Mbps all
streams might not get an equal share of the network cards maximum throughput.

6.30.1:C11
Fixed issues with stopped events for manual triggered recording.

6.30.1:C12
Date format now displayed correctly in ACM.

6.30.1:C13
Corrected issue with drifting over/under exposed images


Known Bugs/Limitations
======================

6.30.1:L1
The status LED is unlit during the boot-up sequence and then goes steady green
when system is ready.

6.30.1:L2
RTSP over TCP may cause choppy video if block size is not optimized or set
during video connection.

6.30.1:L3
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

6.30.1:L4
Text modifiers #x #y #z #Z #L do not work for upload file/folder names,
TCP/HTTP notification text or e-mail  subject/message.

6.30.1:L5
When downgrading to an older firmware, the root password might be changed back
to its default password.

6.30.1:L6
Capture mode change might require a camera restart to get full FoV.

6.30.1:L7
Using identical start and stop time for a scheduled event will never trigger an
event.

6.30.1:L8
Some special UTF-8 characters can not be used for privacy mask names.


Supported AXIS VAPIX API Image Resolutions for AXIS P3224-LV/LVE and AXIS P3225-LV/LVE
======================================================================================

Resolution  Exceptions
==========  ==========

1920x1200   5)
1920x1080   3) 4)
1600x1200   5)
1400x1050   3) 4) 5)
1280x960
1280x800    3) 4) 5)
1280x720
1024x768
1024x640
800x600
854x480
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
160x120
160x100
160x90

2560x1440   1) 3) 4) 6) 7)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface
2) Available for Overview view
3) 1080p 1920x1080 (16:9) @ 25/30 fps (WDR)
4) 1080p 1920x1080 (16:9) @ 50/60 fps (no WDR)
5) WUXGA 1920x1200 (16:10) @ 25/30 fps (no WDR)
6) 720p 1280x720 (16:9) @ 25/30 fps (WDR)
7) 720p 1280x720 (16:9) @ 50/60 fps (no WDR)