FIRMWARE RELEASE NOTE ===================== Products affected: AXIS P1354/-E Release date: 2015-10-16 Release type: Production Firmware version: 5.90.1 File name: P1354_5_90_1.bin Preceding release: 5.60.1.5 -------------------------------------------------------------------------------- Upgrade instructions ===================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New features ============ 5.90.1:F1 Secure FTP (SFTP) is now supported for a more secure file transfer method. 5.90.1:F2 Edge Storage robustness is improved with features to detect and repair faults due to unexpected loss of storage media. 5.90.1:F3 Storage limit offers a possibility to control how much storage space may be used for recordings. This is available via VAPIX. 5.90.1:F4 Axis network cameras now support NAS drives over 2TB. 5.90.1:F5 Storage manager now collects information about SD card usage. 5.90.1:F6 AXIS Video Motion Detection 3, which includes Axis False Alarm Filtering, is now a pre-installed ACAP application and replaces the built-in Motion Detection in the product Web GUI. The built-in Motion Detection is still available via VAPIX. Axis strongly recommends current users of the Motion Detection API to plan for transfer to the AXIS Video Motion Detection 3 API, please see the VAPIX Library. 5.90.1:F7 Available ONVIF Media Profiles are now presented and configurable using the product Web GUI. 5.90.1:F8 With SD card Encryption it is now possible to enable encryption of the SD card to protect your data. This encryption is transparent to users and VMS solutions making it possible to activate without adaptations. This feature is presented and configurable both in the Web GUI and via VAPIX. 5.90.1:F9 Improved start-up time. 5.90.1:F10 Edge storage recording robustness is improved with an automatic database repair feature. 5.90.1:F11 Max exposure time parameter is now available in the Camera Settings. It can be used in LPR installations when setting Max exposure time shorter than default Max shutter time. 5.90.1:F12 SNMP MIB r/w OID values are saved after reboot. Corrections ============ 5.90.1:C1 Select "Use Temporary Mode" if during ftp upload temporary files are required. 5.90.1:C2 Improved robustness for Axis ACAPs. 5.90.1:C3 Improved handling of frequent I/O triggering. 5.90.1:C4 When DST is enabled, export recordings can now be done via web interface. 5.90.1:C5 Reduced audio noise levels from internal microphone. 5.90.1:C6 Passwords can now contain "#". 5.90.1:C7 PullMessages now follow the ONVIF specification 9.1.2. 5.90.1:C8 Users with admin permissions can edit ACAP configuration settings. 5.90.1:C9 It is now possible to select starting point when playing back a recording while using multicast and H.264. 5.90.1:C10 Improved synchronization between sound and video when having low fps and long GOV length. Known Bugs/Limitations ====================== 5.90.1:L1 Recording streams to SD card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 5.90.1:L2 If setting the video stream resolution to an invalid value, it is not possible to start streaming without specifying a valid resolution or correcting the video stream resolution to a valid resolution. Supported AXIS VAPIX API Image Resolutions for AXIS P1354/-E ============================================================ Resolution Exceptions ========== ========== 1280x960 3) 1280x800 3) 1280x720 3) 1024x768 3) 800x600 800x450 640x480 640x360 480x360 480x270 320x240 320x180 240x180 176x144 160x120 160x90 1400x1050 1) 3) 768x576 1) 720x576 1) 704x576 1) 704x480 1) 704x288 1) 704x240 1) 384x288 1) 352x288 1) 352x240 1) 240x135 1) 192x144 1) 176x120 1) 80x60 1) 2) 80x50 1) 3) 1) Not visible in web user interface 2) SVGA 800x600 (4:3) 3) 720p 1280x720 (16:9)