FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS M7011

Release date:      2016-06-22

Release type:      Production

Firmware version:  5.90.1.1

File name:         M7011_5_90_1_1.bin

Preceding release: 5.90.1

--------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Corrections in 5.90.1.1 since 5.90.1
====================================

5.90.1.1:C01
Fixed a critical security vulnerability – update strongly recommended.

5.90.1.1:C02
Disable warning pop-up while continuous recording.

5.90.1.1:C03
Fix proper deletion of old recordings.

5.90.1.1:C04
Normal CPU usage from triggerd.

5.90.1.1:C05
SPS/PPS data now available before every I-frame.

5.90.1.1:C06
Correct uncompressed image buffer alignment to make it compatible with the RAPP library.

5.90.1.1:C07
Increased maximum amount of simultaneous AVHS connections.

5.90.1.1:C08
Optimized SAMBA polling frequency.

5.90.1.1:C09
Dynamic text overlay available on all view sources.

5.90.1.1:C10
Correct the output of the trigger buttons to work more than once in IE.

5.90.1.1:C11
Fixed cooperation issues between tampering and privacy masks.

5.90.1.1:C12
Date format now displayed correctly in ACM.

5.90.1.1:C13
Analytics performance improvements.

5.90.1.1:C14
Corrected inverted PT-head movements when using ONVIF.

5.90.1.1:C15
The video format when no camera is connected can now be changed to NTSC.

5.90.1.1:C16
Added HTB support.

5.90.1.1:C17
Preset positions can now be selected in the Action Rule Setup when a PTZ driver is used.

5.90.1.1:C18
Fixed issues with starting always multicast.

5.90.1.1:C19
Bitmap 'image size' header information checked before being accepted as a scalable overlay.

5.90.1.1:C20
Led pulse button can now be turned on in Internet Explorer.

5.90.1.1:C21
Increased Java applet's expiration date.

5.90.1.1:C22
Fixed privacy mask issues.

5.90.1.1:C23
Added viewer access rights to see the guard tour's running status.

5.90.1.1:C24
Added information to crash report.

5.90.1.1:C25
Stream profiles are correctly preserved after reboot.


Known Bugs/Limitations
======================

5.90.1.1:L1
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

5.90.1.1:L2
Text overlays with video data in each stream will not be correct in quad view 

5.90.1.1:L3
If setting the video stream resolution to an invalid value, it is not 
possible to start streaming without specifying a valid resolution or correcting 
the video stream resolution to a valid resolution. 


Supported AXIS VAPIX API Image Resolutions for AXIS M7011
=========================================================

Resolution  Exceptions
==========  ==========

D1
720x576     2)
720x480     3)
4CIF
704x576     2)
704x480     3)
2CIF
704x288     2)
704x240     3)
CIF
352x288     2)
352x240     3)
QCIF
176x144     2)
176x120     3)

VGA
640x480     1)
analyze     1)

1) Not visible in web user interface
2) PAL mode resolution
3) NTSC mode resolution