FIRMWARE RELEASE NOTE 
=====================

Products affected:  AXIS M7011

Release date: 		2015-10-16 

Release type: 		Production

Firmware version:   5.90.1

File name:          M7011_5_90_1.bin

Preceding release:  5.75.1

--------------------------------------------------------------------------------

Upgrade instructions
=====================

Upgrade the firmware with AXIS Camera Management, HTTP, or FTP.
Follow the instructions given in the User Manual, at 
http://www.axis.com/support/tecnical-notes/how-to-upgrade, 
or howtoupgrade.txt, which is included in the firmware folder.


New features
============

5.90.1:F1
Available ONVIF Media Profiles are now presented and configurable using the 
product Web GUI. 

5.90.1:F2
With SD card Encryption it is now possible to enable encryption of the SD card 
to protect your data. This encryption is transparent to users and VMS solutions 
making it possible to activate without adaptations.
  
This feature is presented and configurable both in the Web GUI and via VAPIX.  

5.90.1:F3
Improved start-up time. 

5.90.1:F4
Edge storage recording robustness is improved with an automatic database repair 
feature. 

5.90.1:F5
SNMP MIB r/w OID values are saved after reboot. 


Corrections
============

5.90.1:C1
Select "Use Temporary Mode" if during ftp upload temporary files are required. 

5.90.1:C2
ONVIF users are now handled when PTZ Control Queue is enabled. 

5.90.1:C3
Removed LLDP-MED logs containing spam. 

5.90.1:C4
Improved robustness for Axis ACAPs. 

5.90.1:C5
Improved handling of frequent I/O triggering.  

5.90.1:C6
When DST is enabled, export recordings can now be done via web interface. 

5.90.1:C7
Passwords can now contain "#". 

5.90.1:C8
PullMessages now follow the ONVIF specification 9.1.2. 

5.90.1:C9
Users with admin permissions can edit ACAP configuration settings. 

5.90.1:C10
Manual triggers for all enabled View Areas are shown. 

5.90.1:C11
It is now possible to select starting point when playing back a recording while 
using multicast and H.264. 


Known Bugs/Limitations
======================

5.90.1:L1
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause 
missing frames/sequences. 

5.90.1:L2
Text overlays with video data in each stream will not be correct in quad view 

5.90.1:L3
If setting the video stream resolution to an invalid value, it is not 
possible to start streaming without specifying a valid resolution or correcting 
the video stream resolution to a valid resolution. 


Supported AXIS VAPIX API Image Resolutions for AXIS M7011
=========================================================

Resolution  Exceptions
==========  ==========

D1
720x576     2)
720x480     3)
4CIF
704x576     2)
704x480     3)
2CIF
704x288     2)
704x240     3)
CIF
352x288     2)
352x240     3)
QCIF
176x144     2)
176x120     3)

VGA
640x480     1)
analyze     1)

1) Not visible in web user interface
2) PAL mode resolution
3) NTSC mode resolution