FIRMWARE RELEASE NOTE ===================== Products affected: AXIS M3044-WV Release date: 2017-09-19 Release type: Production Firmware version: 7.30.1 File name: M3044-WV_7.30.1.bin Preceding release: 6.15.6.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware with AXIS Camera Management, HTTP, or FTP. Follow the instructions given in the User Manual, at http://www.axis.com/support/tecnical-notes/how-to-upgrade, or howtoupgrade.txt, which is included in the firmware folder. New features in 7.30.1 since 6.15.6.1 ================================================================================ 7.30.1:F1 Added ONVIF GetVideoEncoderConfigurationOptions extension. This makes it possible for an ONVIF client to get e.g. the bitrate range of the camera. 7.30.1:F2 It is now possible to specify image rotation via ONVIF video source configuration 7.30.1:F3 The FTP Server is now disabled by default as it is not used during normal operation and may pose a security risk.The FTP Server may be enabled during advanced maintenance or troubleshooting in Settings -> System -> PlainConfig -> Network. 7.30.1:F4 Support for LLDP neighbor announcements. Products announce themselves now in the network via LLDP protocol. 7.30.1:F5 The functionality of enabling Axis DNS Service via control button has been disabled by default. It can be enabled again using VAPIX. 7.30.1:F6 Axis Video Motion Detection (VMD) 4 replaces Axis VMD 3 as preinstalled application. 7.30.1:F7 Changed the default web server authentication from Basic & Digest to Digest only. 7.30.1:F8 Support for Brute Force Delay Protection. The product can block a client for a period of time if too many login attempts failed. Brute Force Delay Protection can be configured under System -> PlainConfig -> System -> System PreventDoSAttack. 7.30.1:F9 Upon a factory default, the camera will generate a self-signed certificate at boot and enable HTTPS. This allows clients to use encrypted access from start. If HTTPS is to be used in daily operations, it is recommended to replace the generated self-signed certificate with a CA-signed certificate. 7.30.1:F10 The Axis On Screen Crontrols add-on makes it possible for Axis Camera Station (ACS) or a VMS to get information about various features of the camera. This information is available through a JSON API via a CGI. 7.30.1:F11 The former user group selections for HTTPS Connection Policy (administrator, operator, viewer) have been merged to one single HTTPS Connection Policy. 7.30.1:F12 Support for AXIS SD card health API. The SD card health API allows a client to track and request the health and wear-out state of an camera with AXIS Surveillance SD Card. 7.30.1:F13 Support for automatic license key installation when installing an ACAP under Settings -> Apps. 7.30.1:F14 It is now possible to add hidden wireless networks via SSID manually. 7.30.1:F15 Support for Adaptive Resolution. Adaptive Resolution is enabled per default and takes only effect when viewing live stream in the web-interface. The viewing client will receive a image resolution that is adapted or close to the viewing clients real display resolution to higher the user experience. 7.30.1:F16 Support for Zipstream Dynamic FPS - Lower Limit Support for Zipstream Dynamic GOP - Upper Limit It is now possible to further adjust and set limits for Dynamic FPS and Dynamic GOP settings and can be configured under Stream settings -> Zipstream. 7.30.1:F17 Support for Flash All/Factory Default while performing a firmware update. It is now possible to select an option that will factory default the camera after a firmware update/downgrade has been performed under Settings -> System -> Maintenance. 7.30.1:F18 If Network Share is setup to use DNS host name as host and if the IP address changes after mount, the host name is resolved to current IP address. 7.30.1:F19 Added support for ONVIF standardised I/O events. 7.30.1:F20 Corrected behavior for conditional triggers. 7.30.1:F21 Improved handling for networks with small MTU values. 7.30.1:F22 Improved Zipstream using dynamic frame rate. 7.30.1:F23 Support for ONVIF Profile G. Corrections in 7.30.1 since 6.15.6.1 ================================================================================ 7.30.1:C1 Corrected handling of #D text overlay, it's no longer needed to specify the camera source. 7.30.1:C2 Improvements in session ID handling for rtsp streaming. Useful when streaming in some video clients. 7.30.1:C3 Added link local IPV6 support for NTP. 7.30.1:C4 Fixed Security vulnerability CVE-2016-5195. 7.30.1:C5 Improved HTTP image upload stability in unstable networks. 7.30.1:C6 Corrected Turkey/Istanbul timezone from GMT+2 to GMT+3. 7.30.1:C7 Improved camera stability when metadata is used. 7.30.1:C8 Improved recording stability towards Axis Companion Recorder. 7.30.1:C9 Corrected an issue that made the overlay text disappear when a client requested a new video stream. 7.30.1:C10 Corrected an issue that let the camera become unresponsive in rare occasions. 7.30.1:C11 Corrected an issue in the event system that prevented the camera from re-sending the SMTP notification every 10 seconds in case the receiving server reported an error. 7.30.1:C12 Reduced the waiting time for receiving a video stream significantly when a 2nd client requests a video stream via multicast. 7.30.1:C13 The area zoom functionality has been removed from the web-interface. Area zoom was used to draw a rectangle in the live view to let the camera either mechanical or digital PTZ to its desired position. 7.30.1:C14 Fixed a issue that let the recorded video to the computer using the Video Capture button be incorrectly displayed or unusable in some rare occasions. 7.30.1:C15 Corrected an issue when controlling a camera via NTCIP / PTZoverSNMP ACAP using absolute PAN command. Please use the latest version of the ACAP. 7.30.1:C16 Corrected security vulnerability CVE-2016-2147. 7.30.1:C17 Corrected critical vulnerability ACV-120444. 7.30.1:C18 Corrected possibility to include SPS (Sequence Parameter Set) and PPS (Picture Parameter Set) in the stream according to ACAP documentation. 7.30.1:C19 Fixed issues with stopped events for manually triggered recording. 7.30.1:C20 Date format now displayed correctly in ACM. 7.30.1:C21 Optimized Network Share polling frequency. 7.30.1:C22 Improved stability in actionengine (tcp notification). 7.30.1:C23 Improved camera stability when recording via ONVIF profile G. Known Bugs/Limitations ================================================================================ 7.30.1:L1 Recording streams to SD Card with total bit rate above 12Mbit/sec may cause missing frames/sequences. 7.30.1:L2 It is recommended to perform a factory default after downgrading the cameras firmware if needed. 7.30.1:L3 Video streaming H.264 for Safari has been temporarily disabled in the web- interface because of an bug in the Safari browser. 7.30.1:L4 If the highest resolution is set on a view area, the full image (i.e. not the cropped out view area) will be shown. 7.30.1:L5 Connecting to a camera will fail and result in "Unauthorized" message due to an bug in Microsoft Edge 40 browser. This will be corrected by Microsoft in the next version of Edge 41. 7.30.1:L6 An overlay text (e.g. date/time modifier) that has been configured in the classic web-interface will be still shown in the new web-interface even though a user might have disabled the overlay text there after firmware update. A user need to disable the overlay text first in the classic web-interface using http ://ip-address/index.shtml. Supported AXIS VAPIX API Image Resolutions for AXIS M3044-W ================================================================================ Resolution Exceptions ========== ========== 1280x720 1024x576 800x600 640x480 640x360 352x240 320x240 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface