NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS OfficeBasic USB
		    
 Release date:      Feb 14, 2005

 Release type:      PRODUCTION

 Software version:  7.03

 File size:         852 180 bytes
		   
 Last preceding
 release:           7.02
		   

---------------------------------------------------------------------


 Contact Information
 ====================

 Please contact Axis Communications for product information, updates 
 and support at:

 http://www.axis.com


 ---------------------------------------------------------------------


 N.B for ThinWizard users:
 -------------------------

 The preceeding 7.02 release is not supported by ThinWizard due to
 upgrading problems when the print server is located on a 10 Mbit net
 (see Corrected problems section below).
 
 This document describes the changes made between the 7.02 release and this
 release. The release notes for the 7.02 release can be found at the 
 following location:

 http://www.axis.com/ftp/pub_soft/prt_srv/axis_officebasic_usb/7_02/7_02.txt



 Added features in version 7.03
 ==============================


 Removed functionality
 =====================

 
 Corrected problems in version 7.03
 ==================================

 - FTP upgrading print servers connected to a 10 Mbit network to the
   preceeding 7.02 release fails due to the print server resetting the
   connection. This has been corrected in this release.


 Known problems in version 7.03
 ==============================

 - The delete button in the web-interface does not work for the usb-port

 - Select standard TCP/IP port when configuring system for peer-to-peer 
   printing in Windows environment. Printing with the AXIS Port Monitor to
   USB-printers will most likely cause the Print Server to "hang". 

 - If there is an SLP directory agent on the network and the 
   slp-directory-agent option (RFC 2165) is used by the dhcp server, the Print 
   Servers will most likely end up in a non recoverable endless loop.

 - FW 7.03 is not fully compatible with TW 3.00. The Print Server 
   name will be missing and the Status reported by TW 3.0 will be wrong. 
   For full functionality please use TW 3.04, or higher.