NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS OfficeBasic USB
		    
 Release date:      Dec 21, 2004

 Release type:      PRODUCTION

 Software version:  7.02

 File size:         837 898 bytes
		   
 Last preceding
 release:           7.00
		   

---------------------------------------------------------------------


 Contact Information
 ====================

 Please contact Axis Communications for product information, updates 
 and support at:

 http://www.axis.com


 ---------------------------------------------------------------------


 N.B for ThinWizard users:
 -------------------------

 The preceeding 7.00 release is not supported by ThinWizard due to the
 way the DHCP parameter behaves when upgrading from older firmware 
 (see Corrected problems section below).
 
 This document describes the changes made between the 7.00 release and this
 release. The release notes for the 7.00 release can be found at the 
 following location:

 http://www.axis.com/ftp/pub_soft/prt_srv/axis_officebasic_usb/7_00/7_00.txt



 Added features in version 7.02
 ================================


 Removed functionality
 =====================

 
 Corrected problems in version 7.02
 ====================================

 - The DHCP parameter is no longer set to the default value when upgrading
   from a firmware release prior to 6.43 as was the case with the 7.00
   firmware.


 Known problems in version 7.02
 ==============================

 - The delete button in the web-interface does not work for the usb-port

 - Select standard TCP/IP port when configuring system for peer-to-peer 
   printing in Windows environment. Printing with the AXIS Port Monitor to
   USB-printers will most likely cause the Print Server to "hang". 

 - If there is an SLP directory agent on the network and the 
   slp-directory-agent option (RFC 2165) is used by the dhcp server, the Print 
   Servers will most likely end up in a non recoverable endless loop.