NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS 5570e

 Release date:      Jan 15, 2010

 Release type:      SERVICE

 Software version:  7.10.7

 File size:         AXIS 5570e:     1 847 756 bytes

 Last preceding
 release:           7.10.2


---------------------------------------------------------------------


 Contact Information
 ====================


 Please contact Axis Communications for product information, updates
 and support at

 http://www.axis.com


---------------------------------------------------------------------


 Added features in version 7.10.7
 ================================

  - Added a slpv2 attribute, that will respond with the snmp device
    index for the printer port of the current question.

  - Made it possible to use lowercase letters in the parameter PS_NAME.

  - Add information details on the server report about USB non-printer
    devices wrongly connected to the print server.

  - Added possibility to connect a USB device via a USB hub to the
    print server. This solved a problem for some MFP:s containing
    an internal USB hub. The USB MFP or printer devices connected 
    is required to contain at least one printer interface. 


  AXIS 5570e only:

  - The telnet hexdump feature does now include timestamps on the
    dumped packages.

  - New parameter, "Optimize margins", added to the IPDS PCL driver.
    Disabling this parameter can solve problems where wide objects,
    like overlays, is cut off at the right edge.

  - Added support for CP880 (Cyrillic, Multilingual) to the IPDS
    emulator.

  - Added support for ISO 8859/5 (Latin/Cyrillic CP 915) to the
    Note: Support for Cyrillic is available in the IPDS-PCL driver
          only.


 Corrected problems in version 7.10.7
 ====================================

  - Correction of a printer port indexation problem for the 
    dynamically generated SNMPv3 compatible axis-mib, unique 
    to each print server. The problem may have caused responses 
    with wrong or out of range values.

  - Corrected a compatiblity problem with HP All-in-one printer 
    drivers in OS X, that caused installation not to be completed.

  - Corrected a problem with coldstart trap, being sent out always
    due to comparison with wrong default ip address value.

  - Corrected a problem with responses to lpq requests, that caused
    lpr print jobs to stop in HP UX 11.11 environments.
 
  - Corrected a problem with assigning a printer using a logical port
    name, when the printer is offline or paper out. The problem
    caused data or job loss.

  - Corrected memory leak in DNS, that potentially caused the print 
    server to become non-responsive after a long period of operation.


  AXIS 5570e only:

  - Corrected the fonts 2304, 2305, 2306 and 2307 in the IPDS PCL
    driver. These fonts were, in some cases, printed in incorrect
    size.

  - Corrected a problem in the TN5250e data acknowledging mechanism.
    This problem could cause TN5250e printouts to stop in the middle
    of a printout.

  - Improved the TN5250e data acknowledging mechanism during paper
    out conditions.
    This problem could cause pauses in TN5250e printouts.

  - It's now possible to configure IP-address-type parameters via the
    SCS extended emulation.

  - Improved the end-of-job detection in the logical printer's copier
    driver feature. This improves the batch printing support in the
    copier driver.

  - Corrected a problem in TN3270e where Intervention Required
    responses sent with sequence number 0.


 Limitations in version 7.10.7
 =============================

 - Support for Checksums in Netware is not implemented.

 - FW 7.00 and later are not fully compatible with TW 3.00.  The Print Server 
   name will be missing and the Status reported by TW 3.0 will be wrong. 
   For full functionality please use TW 3.04, or higher.

 - Firmware release 7.00 and onwards only supports print servers with Axis
   brand name.