NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS 5570e

 Release date:      Mars 19, 2007

 Release type:      SERVICE

 Software version:  7.10.2

 File size:         1 851 608 bytes

 Last preceding
 release:           7.10


---------------------------------------------------------------------


 Contact Information
 ====================


 Please contact Axis Communications for product information, updates 
 and support at

 http://www.axis.com


---------------------------------------------------------------------



 Added features in version 7.10.2
 ================================

 - The delete button in the web-interface can remove printouts on the USB-port.

 - Added a port name attribute to the SLP printer service. Enhances the 
   Axis AddPrinter support.

 - It's now possible to turn off "edge-to-edge" printing in the IPDS emulator.
   This is controlled by the "Report X Offset" and "Report Y Offset" IPDS
   parameters.

 - Added support for indexing objects by more community values, in order to
   correctly read SNMP objects related to the USB1 port.

 - Added an SNMP printer serial number object and some SNMP parallel port
   objects.


 Corrected problems in version 7.10.2
 ====================================

 - The IPDS PCL driver is now reloading downloaded fonts into the printer
   at every new IPDS printout.

 - The SCS PCL driver can now print chinese double byte characters correct.

 - The SCS emulator is now using correct fonts when printing DBCS characters
   in COR.

 - In some cases, often with slow printers, does LPR/LPD printouts not end.
   The jobs are printed correctly but does not disappear from the spooler.
   This is corrected.

 - Corrected the value of the SNMP sys-up-time object.

 - Corrected a problem in the PPM MIB.

 - LanServer/Manager printing support is corrected in the 5570e TCP/IP model.


 Limitations in version 7.10.2
 =============================

 - Support for Checksums in Netware is not implemented.

 - FW 7.00 and later are not fully compatible with TW 3.00.  The Print Server 
   name will be missing and the Status reported by TW 3.0 will be wrong. 
   For full functionality please use TW 3.04, or higher.

 - Firmware release 7.00 and onwards only supports print servers with Axis
   brand name.