NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS 5570e

 Release date:      Jun 28, 2006

 Release type:      SERVICE

 Software version:  7.08.2

 File size:         AXIS 5570e  1767304 bytes

 Last preceding
 release:           7.08


---------------------------------------------------------------------


 Contact Information
 ====================


 Please contact Axis Communications for product information, updates 
 and support at

 http://www.axis.com


---------------------------------------------------------------------



 Added features in version 7.08.2
 ================================

 - Added support for selecting in- and output tray via the IPDS LCC-command.

 - Added support for 240 and 600 DPI in IPDS LF1-type downloaded fonts with
   relative metrics.

 - Added the fonts 304, 305, 306, 307, 318, 319, 322, 400, 404, 416, 420, 424,
   701 and 20224 to the IPDS PCL driver.

 - Added a copier driver description to the IBM "Add Session" wizard.

 - Added six copier drivers: Oce cm3531/4531, Oce im5530/6030/7230/8530,
   Oce im2330/2830, Oce im3530/4530, Toshiba eSTUDIO2500c/3500c/3510c and
   Toshiba eSTUDIO165/205.


 Corrected problems in version 7.08.2
 ====================================

 - Sometimes TN5250e printouts can stop in the middle with the AS400 spoolfile
   status WTR (writing) and the printer on-line and waiting for print data.
   This problem is corrected.

 - Enhanced the printer status reporting and handling in TN5250e.

 - Corrected a problem where downloaded fonts were discarded in the IPDS
   PostScript driver.

 - Corrected a problem with IM-image scaling in the IPDS PCL driver.
   The IM-images were sometimes both vertically and horizontally replicated.

 - Downloaded IPDS fonts could get mixed up in the PCL driver. This could occur
   if two printouts, with downloaded fonts, is separated with more than 10
   seconds.

 - The Font Name field of the PCL Font Header is now zero padded in the IPDS
   PCL driver.


 Limitations in version 7.08.2
 =============================

 - The delete button in the web-interface does not work for the usb-port.

 - Support for Checksums in Netware is not implemented.

 - Axis ThinWizard is the recommended management tool to use with this print
   server. HP WebJetadmin is neither tested nor supported with this release.

 - FW 7.00 and later are not fully compatible with TW 3.00.  The Print Server 
   name will be missing and the Status reported by TW 3.0 will be wrong. 
   For full functionality please use TW 3.04, or higher.

 - Firmware release 7.00 and onwards only supports print servers with Axis
   brand name.