NEW FIRMWARE RELEASE
                          ====================
                  
                 
Product involved:       Axis 1650

Release date:           Jun 22, 2007

Release type:           Production

Software version:       2.12

Software media:         Axis 1650               Flash

Last preceding release: 2.10

---------------------------------------------------------------------

Contact Information
===================

Please contact Axis Communications for product information, 
updates and support at
 
http://www.axis.com

--------------------------------------------------------------------- 

Added features in version 2.12
==============================
 
1. The testbutton printout has been updated to also include the 
   Server report information.

2. Support for the PPM mib in Windows Vista for easier installation
   of a Standard TCP/IP port.

3. For InkJet printer and MFP:s the status monitor is now supported, 
   if the device is installed using the CAPT Print Monitor in RawTCP
   mode. Supported for version 2.20.0.008/2.20.1.008 or later of the
   CAPT Print Monitor.


Corrected problems
==================

1. Correction of Japanese characters on the webpages, that were 
   malformed in some webbrowsers.
   
2. Correction of Cover open status message.


Known limitations
=================

1. Scanning with a Canon MP device, when the Status monitor is 
   active will occasionally cause problems, such as refusal to start 
   the scan job immediately. Closing the status monitor window solves
   these problems.

2. If a scan job is in progress, print jobs or status inquiries will
   be kept on hold in the print queue on Canon MP devices, giving
   error messages in Windows like 'This document failed to print'. 
   All the print jobs will be printed, when the scan job is finalized 
   and the scan connection is disconnected in the ScanClient. Status 
   inquiries will time out by themselves.

3. It isn't possible to print a test page on a CAPT printer or on a
   Canon Advanced Raster Printing System device.

4. It is not possible to send a fax job over the network on a Bubble Jet
   based MFP. Examples MP830, MP780 and MP730. For that reason the 
   FAX interface information is removed from the internal webpages of
   the AXIS 1650 and connection to the FAX interface is not poosible.



Other Information
=================
1. Scanning in Windows Vista is supported (32bit version only). 
   ScanClient version 1.10 or later is required.

2. Printing in Windows Vista is also supported, both 32bit and 64bit
   versions. Capt Print Monitor version 2.20.0.008/2.20.1.008 or later
   is required.



Best regards
AXIS COMMUNICATIONS AB