NEW SOFTWARE RELEASE
                         ====================


 Products involved: AXIS 5550, AXIS 5400+(v2), AXIS 5600+(v3),

 Release date:      Jan 15, 2010

 Release type:      SERVICE

 Software version:  7.10.7

 File size:         AXIS 5550:      1 339 514 bytes
                    AXIS 5400+(v2): 1 310 284 bytes
                    AXIS 5600+(v3): 1 318 064 bytes

 Last preceding
 release:           7.10.2


---------------------------------------------------------------------


 Contact Information
 ====================


 Please contact Axis Communications for product information, updates
 and support at

 http://www.axis.com


---------------------------------------------------------------------


 Added features in version 7.10.7
 ================================

  - Added a slpv2 attribute, that will respond with the snmp device
    index for the printer port of the current question.

  - Made it possible to use lowercase letters in the parameter PS_NAME.

  - Add information details on the server report about USB non-printer
    devices wrongly connected to the print server.

  - Added possibility to connect a USB device via a USB hub to the
    print server. This solved a problem for some MFP:s containing
    an internal USB hub. The USB MFP or printer devices connected 
    is required to contain at least one printer interface. 


 Corrected problems in version 7.10.7
 ====================================

  - Correction of a printer port indexation problem for the 
    dynamically generated SNMPv3 compatible axis-mib, unique 
    to each print server. The problem may have caused responses 
    with wrong or out of range values.

  - Corrected a compatiblity problem with HP All-in-one printer 
    drivers in OS X, that caused installation not to be completed.

  - Corrected a problem with coldstart trap, being sent out always
    due to comparison with wrong default ip address value.

  - Corrected a problem with responses to lpq requests, that caused
    lpr print jobs to stop in HP UX 11.11 environments.
 
  - Corrected a problem with assigning a printer using a logical port
    name, when the printer is offline or paper out. The problem
    caused data or job loss.

  - Corrected memory leak in DNS, that potentially caused the print 
    server to become non-responsive after a long period of operation.


 Limitations in version 7.10.7
 =============================

 - Support for Checksums in Netware is not implemented.

 - FW 7.00 and later are not fully compatible with TW 3.00.  The Print Server 
   name will be missing and the Status reported by TW 3.0 will be wrong. 
   For full functionality please use TW 3.04, or higher.

 - Firmware release 7.00 and onwards only supports print servers with Axis
   brand name.