NEW SOFTWARE RELEASE
                         ====================


 Products involved: Axis 5600
		    Axis 5400
		    Axis 640

 Release date:      Axis 5600		Apr 28, 2003
 		    Axis 5400		May  5, 2003
		    Axis 640		May  5, 2003

 Release type:      Service Release

 Software version:  6.16.0

 File size:         Axis 5600		1 213 130 bytes
		    Axis 5400		1 213 128 bytes
		    Axis 640		1 272 756 bytes

 Last preceding
 release:           6.15.1


---------------------------------------------------------------------


 Contact Information
 ====================


 Please contact Axis Communications for product information, updates 
 and support at

 http://www.axis.com


---------------------------------------------------------------------

 Limitations in version 6.16.0
 =============================
   
 Axis 640 does not support AppleTalk.   
 The Etrax 100 specific correction only apply to Axis 5400 and 5600.

 Added features in version 6.16.0
 ================================

 In Netware networks, using Q-mode over IPX, support for walk-the-tree
 is added. Now the Print Server resolves the name of the que-volume
 even if the volume resides on a file server without any replica in the
 NDS tree.


 Corrected problems in version 6.16.0
 ====================================

 The problem of using arp/ping to set a static ip-address when dhcp is
 enabled is resolved.

 The dhcp-option domain-name is corrected, the domain name parameter is
 updated.

 Etrax 100 specific correction:
 The Bitronics negotiation routines are improved. Reverse data reading 
 is improved, e.g. Ricoh AP 2600N and Ricoh 1018 works better now.
 Printer connectivity is improved, situations which earlier resulted
 in connection loss is now resolved, e.g. problems where it seems that
 the printer is stuck in sleep mode, is now resolved without the need to
 restarting the print server. 

 Etrax 100 specific correction:
 The serial port driver, for multiport print servers, is rewritten in
 order to resolve problems with stability and performance, specifically
 reading data from the serial port.

 Known problems in version 6.16.0
 ================================

 HP WebJetadmin is neither tested nor supported with this release.

 Succesful paralell-port "flash-loading" might require two, or more
 attempts in some cases.

 Support for Checksums in Netware is not implemented.

 With some printer models, e.g ......, printing is prevented unless
 printer info management is disabled. In these cases the printer display
 is flashing "Processing Job" with 5 second intervals.