PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2006-08-22

Release type: Production

Driver version: 2.00

Filename: Videotec-2.00.ptz

Previous release:  n/a

---------------------------------------------------------------------

Release 2.00
=============

2.00:1 	First release. Supports DTMRX2.
	Should also work with other devices using the same protocol.

Known problems and limitations in version 2.00
==============================================

Note! Some limitations are also model dependent and can behave
      different on different models!

2.00:2	To use this version of the driver, firmware 4.30 or higher is required.

2.00:3 	Different speeds are supported by the protocol and driver, but the DTMRX2 
	just controls the output relays in an on/off fashion,

2.00:4 	The user manually has to input the correct speed/timing in
	the driver options since they depend on the connected camera.

2.00:5 	The DTMRX2 only has aux1, but the protocol also supports 
	aux[2-4].

2.00:6  The driver does not support presets.