PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2005-11-08

Release type: Production

Driver version: 2.01

Filename: Eneo-PTH-2.01.ptz

Previous release:  1.00

---------------------------------------------------------------------

Release 2.01
=============

2.01:1 Added notification for driver movements. This is used by
       motion detection and it can also be used by events.


Known problems and limitations in version 2.01
==============================================

Note! Some limitations are also model dependent and can behave
      different on different models!

2.01:2 To use this version of the driver, firmware 4.30 or higher
       is required.

2.01:3 Some older VPT-42RS units may need pull-up/pull-down
       resistors on the RS485 wires otherwise commands may sometimes be lost.

2.01:4 To be able to save the zoom and focus positions in a preset,
       the camera unit must supply zoom and focus feeback position signals
       that match the VPT-42RS units requirement. The iris position is not
       saved in a preset.

2.01:4 This driver have no Auto-focus and Auto-iris functions
       (the PTZ protocol don't have "Auto-focus" and "Auto-iris" commands).