|
Daisy-chain connections.
|
When initializing the PTZ-units, a "Device ID" will be assign to each connected unit in the daisy-chain. The first unit in the chain will get "Device ID" 1, the second unit will get "Device ID" 2 and so on.
A power fail on some of the units in the daisy-chain will interrupt the communication will all the following units in the daisy-chain. When the power is back again, a re-initialization is required to be able to communicate with the units again. When changing the connection order of the units on the daisy-chain, a re-initialization is required to assign "Device ID" to each unit. After a re-initialization of the daisy-chain, the mapping of Video sources and "Device ID" have to be checked and updated. The preset positions may also need to be verified.
An initialization of the daisy-chain can be made by restarting the camera server or by changing the mapping of the video sources or by changing "Device ID" in the configuration.
|
|
Video Source Configuration |
| Parameter |
Description |
Range |
| Device ID |
This is the address of the connected device. Since the PTZ-units operates in a daisy-chain configuration the first unit in the chain will have Device ID 1, the second unit will have Device ID 2 and so on. |
1-9 |
|
|
Driver Specific Settings
|
There are no driver specific settings for this driver.
|
|
Mechanical limits
|
| Movement Limits |
Minimal value |
Maximal value |
Comment |
| Left |
-100 |
100 |
Limits for VC-C4 |
| Right |
-100 |
100 |
| Up |
90 |
-30 |
| Down |
90 |
-30 |
| Left |
-169 |
169 |
Limits for VC-C4R |
| Right |
-169 |
169 |
| Up |
10 |
-90 |
| Down |
10 |
-90 |
| Left |
-100 |
100 |
Limits for VC-C50i |
| Right |
-100 |
100 |
| Up |
90 |
-30 |
| Down |
90 |
-30 |
| Left |
-169 |
169 |
Limits for VC-C50iR |
| Right |
-169 |
169 |
| Up |
10 |
-90 |
| Down |
10 |
-90 |
| Zoom Limits |
|
|
|
| Zoom wide |
1 |
9999 |
|
| Zoom tele |
1 |
9999 |
| Focus Limits |
|
|
|
| Focus near |
1 |
9999 |
|
| Focus far |
1 |
9999 |
| Optical Data |
|
|
|
| Min. field angle |
1 |
50 |
Not used. |
| Max. field angle |
1 |
50 |
|
|
Light Control
|
| Parameter |
Description |
Range |
| Back light compensation |
Set to true to use the back light compensation. |
true, false |
|
|
Extended Driver Specific Settings
|
| Parameter |
Description |
Range |
| Move speed |
The current maximum pan and tilt speed. |
1-100 |
| Goto preset delay |
Time (in seconds) it takes for the image to stabilize it self, after the camera has performed the longest "goto preset action". Used for disabling/enabling image analysis (e.g. motion detection). |
0-100 |
|