PTZ DRIVER RELEASE NOTES ======================== Release date: 2006-07-12 Release type: Production Firmware version: 2.01 Filename: Hymatom-2.01.ptz Previous release: n/a --------------------------------------------------------------------- Release 2.01: ============= This is the first production release. Known problems and limitations in version 2.01 ============================================== Note! Some limitations are also device type dependent and can behave different on different Hymatom devices! 2.01:1 To use this version of the driver, firmware 4.30 or higher is required. 2.01:2 A Hymatom C-DECODE LCR controller is required between the video server and the PTZ unit. The video cable and the RS485 serial communication wires from the video server are connected to the Hymatom C-DECODE LCR. The Hymatom C-DECODE LCR can be configured by using LCR protocol commands. 2.01:3 Focus and iris control are not supported by the driver.