PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2005-11-08

Release type: Production

Firmware version: 2.01

Filename: american_dynamics-2.01.ptz

Previous release:  1.01

---------------------------------------------------------------------

Release 2.01:
=============

2.01:1 Added notification for driver movements. This is used by
       motion detection and it can also be used by events.

2.01:2 Added support for OSD menus.


Known problems and limitations in version 2.01
==============================================

Note! Some limitations are also device type dependent and can behave
      different on different Sensormatic devices!

2.01:3 To use this version of the driver, firmware 4.30 or higher
       is required.

2.01:4 A manual focus movement may disable auto-focus
       (Sensormatic device type dependent).

2.01:5 A manual iris movement may disable auto-iris
       (Sensormatic device type dependent).

2.01:6 The auto-focus or auto-iris command will set both
       auto-focus and auto-iris at the same time. It is not possible
       to set only one of them.

2.01:7 Some Sensormatic device types may only have a fixed focus setting
       (no focus adjustments possible).

2.01:8 After start, it may take some time before the RS485 serial
       communication will start to work. Some errors or warnings may
       be written in the log-file shortly after the start.