Basic Parameters
Parameter Description Range
Device ID This is the address of the connected device. Since the Sony EVI units operates in a daisy-chain configuration the first unit in the chain will have Device ID 1, the second unit will have Device ID 2 and so on. 1-7
Device type Select which type of device that is used. "EVI-G20/G21",
"EVI-D30/D31",
"EVI-D100/D100P",
"EVI-D70/D70P"
Flip pan If set to true, relative pan operations will be inverted true, false
Flip tilt If set to true, relative tilt operations will be inverted true, false
Enable digital zoom If set to false, digital zoom will never be used. Digital zooming will start at zoom value 7000.
Only EVI-D100/D100P and EVI-D70/D70P support digital zoom.
true, false

Advanced Parameters
Parameter Description Range
Move Speed Set the default speed to use for pan, tilt and zoom movements. 1-100
Block auxiliary commands If true, the auxiliary command support for the device is disabled.
Auxiliary commands may interfere with the drivers device control.
true, false
Min field angle for digital zoom 1/10 degrees (i.e. a value of 15 represents an angle of 1.5 degrees).
See Mechanical Limits below.
Only EVI-D100/D100P and EVI-D70/D70P support digital zoom.
1-1000

Mechanical limits
Movement Limits Minimal value Maximal value Comment
Left -30 30 Limits for EVI-G20/G21
Right -30 30
Up -15 15
Down -15 15
Left -100 100 Limits for EVI-D30/D31 and
EVI-D100/D100P
Right -100 100
Up -25 25
Down -25 25
Left -170 170 Limits for EVI-D70/D70P (when mounted upside down, see notes below)
Right -170 170
Up -30 90
Down -30 90
Zoom Limits
Zoom wide 1 9999 For EVI-D100/D100P and
EVI-D70/D70P, digital zoom is 7000-9999
Zoom tele 1 9999
Focus Limits
Focus near 1 9999  
Focus far 1 9999
Optical Data
Min field angle 1 1000 Degrees. Min field angel is at max optical zoom.
Max field angle 1 1000

The optical data limits are used to tune image centering:
  1. Zoom out completely and adjust Max Field Angle until the spot you click becomes centered accurately.
  2. Disable digital zoom (EVI-D100/D100P and EVI-D70/D70P only) and zoom in completely and repeat for Min Field Angle.
  3. For EVI-D100/D100P and EVI-D70/D70P enable digital zoom and zoom in completely and repeat for Min field angle, digital zoom.
Notes.