PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2004-09-03

Release type: Production

Firmware version: 1.01

Filename: Pelco-1.01.ptz

Previous release:  1.00

---------------------------------------------------------------------

Release 1.01:
=============

1.01:1 Added support for device type Pelco Spectra III.


Known problems and limitations in version 1.01
==============================================

Note! Some limitations are also device type dependent and can behave
      different on different Pelco devices!

1.01:2 With auto-focus set off, after a pan, tilt or zoom movement,
       the auto-focus will be activated.

1.01:3 With auto-iris set off and zoom wide, after a pan or tilt movement,
       the auto-iris will be activated.

1.01:4 With auto-iris set on and the iris manual changed,
       after a zoom movement, the iris is not changed.
       With auto-iris set on and zoom tele and the iris manual changed,
       after a pan or tilt movement, the iris is not changed.


Known problems and limitations with Pelco Spectra III.
======================================================
1.01:5 Pan, tilt and zoom positions may sometimes be displayed in the picture.

1.01:6 To enable auto-iris, a 15 degrees pan or tilt movement is required.
======================================================