FIRMWARE RELEASE NOTES
======================

Products affected: AXIS 223M Network Camera

Release date:      2010-06-03

Release type:      Production

Firmware version:  4.47.1

File name:         223M_4_47_1.bin

Preceding release: 4.47

----------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management 2.0, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.


RELEASE 4.47.1
==============


Corrections in 4.47.1 since 4.47
================================

4.47.1:C01 In a rare case, unit might get inaccessible through HTTP after 
	   upgrade and change of HTTP authentication policy.

4.47.1:C02 Error 503 when using 320x240 resolution, 180 degrees rotation does 
           not appear anymore. 
           
4.47.1:C03 More sensitive motion detection is introduced.

4.47.1:C04 Corrected a problem with sockets in motion detection.

4.47.1:C05 A time handler issue has been corrected.

Known limitations in 4.47.1
===========================

4.47.1:L01 When the IR cut filter is turned on or off events are triggered and 
           the motion detection activity monitor shows movement.
         
4.47.1:L02 When switching between resolution modes privacy mask position changes.

4.47.1:L03 If the privacy mask goes beyond the right margin and the image gets
           rotated, the mask might disappear.
         
4.47.1:L04 Certain combinations of coordinates of privacy masks in widescreen mode 
           makes the masks disappear.
          
4.47.1:L05 Having mirror image enabled and switching between large wide and 
           normal resolutions causes the video to disappear, a restart is 
           necessary to get video running again.

4.47.1:L06 Overlay Image gets part of its image cropped at larger horizontal 
           positions and max resolution.

4.47.1:L07 The maximum available resolution for MPEG-4 is 640x480 or 640x360
           depending on the selected resolution mode.


Application Developer Information
=================================

Supported AXIS VAPIX API Image Resolutions in Normal Mode:

Resolution  Exceptions
==========  ==========
1600x1200
1280x960
1024x768
800x600
768x576     1)
704x576     1) 2)
704x480        2)
704x288        2)
704x240        2)
640x480
480x360
384x288
352x288        2) 3)
352x240        2) 3)
320x240
240x180              4)
192x144
176x144        2) 3)
176x120        2) 3)
160x120

Supported AXIS VAPIX API Image Resolutions in Widescreen Mode:

Resolution  Exceptions
==========  ==========
1600x900             4)
1280x720
1024x576
800x450              4)
640x360
480x270              4)
320x180              4)
240x135              4)
160x90               4)

1) Not available as bitmap (bmp) image
2) Not equally scaled
3) No support for 90/270 degrees rotation
4) Width is reduced to the closest value divisable by 8 when rotated 90/270
   degrees

The AXIS VAPIX API, RTSP - Interface Specification found at www.axis.com is
supported by the AXIS 223M.

The following AXIS VAPIX API groups are supported by the AXIS 223M. For more
information please refer to the AXIS VAPIX API specification version 2,
available at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video   Video status
Motion Detection
I/O
Serial port
IP filter
Audio

Built in templates for dynamic parameters are:

Template         Group
========         =====
'event'          Event
'external_video' ExternalVideo
'ftpaction'      Event.E#.Actions
'ftp_config'     EventServers.FTP
'httpaction'     Event.E#.Actions
'http_config'    EventServers.HTTP
'hwaction'       Event.E#.Actions
'motion'         Motion
'smtpaction'     Event.E#.Actions
'source'         Sequence.S0.Source
'tcpaction'      Event.E#.Actions
'tcp_config'     EventServers.TCP