SOFTWARE RELEASE NOTES ====================== Products involved: AXIS 2110 Network Camera Release date: 2004-08-27 Release type: Production Software version: 2.42 Filename: 2110_242.bin Last preceding release: 2.40 --------------------------------------------------------------------- Upgrade instructions: Important: 0. Upgrade to version 2.42 is only possible if version 2.12 or later is installed. 1. Make sure that "active applications" such as continuous transmission of images via ftp or smtp from the Axis Network Camera are disabled prior to initiating upgrade. 2. Make sure to take notes of your application/layout and other settings prior to upgrading since these settings will be lost during upgrade. 3. You must be at the command prompt and in the directory that contains the Upgrade File. Example: C:\Axis\2110\2_42> 4. Open an ftp connection to the unit you want to upgrade from a command prompt. (Do not use a Windows based FTP-program for this, use only command line FTP programs!) 5. Login as root. The default password for the root user is "pass" unless changed by the user. You must be logged in as the root user to upgrade the unit. 6. Change to binary transfer mode by typing "bin" and press enter. 7. Type "hash" and press enter. (This will allow you to see how the upgrade progresses) 8. Type the command "put XXX.bin flash_all" where XXX.bin is replaced by the name of the name of upgrade file you downloaded (and maybe decompressed) from our site. It is typically named 2110_242.bin or axis2110.bin. 9. Wait for the flash load to finish, this may take 1-10 minutes. Always wait at least 10 minutes for the flash upgrade to complete. 10. Your unit will automatically restart using the new firmware. 11. Reconfigure your settings. RELEASE 2.42 ============ New in 2.42 =========== 2.42:1 Corrections for security issues that enable a remote attacker to execute arbitrary shell script commands. 2.42:2 Third party software licenses text added to the product's web interface. Application developer / scripting in 2.42: ========================================== The following HTTP API groups are supported by the AXIS 2110. For more information, please see the HTTP API document available at www.axis.com. Group Exceptions ===== ========== General Get property Jpeg/Mjpg Audio I/O control PPP The new improved audio functionality uses G723 as the default audio codec, which gives a higher compression compared to the former G721. It uses singlepart instead of multipart communication to reduce overhead. For backward compatibility change the following parameters in the product: root.Audiod.audioEncoding="G721" root.Audiod.httpMessageType="multipart" Known limitations in version 2.42 ================================= L1. Up to 350KB of RAM memory is available for pre/post alarm image storage.