SOFTWARE RELEASE NOTES ====================== Products involved: AXIS 2100 Network Camera Release date: 2004-10-28 Release type: Production Software version: 2.43 Filename: axis2100.bin Last preceding release: 2.42 ----------------------------------------------------------------------- Upgrade instructions: Important: 0. Upgrade to version 2.43 can only be done if version 2.12 or later is installed. 1. Make sure that "active applications" such as continuous transmission of images via ftp or smtp from the Axis Network Camera are disabled prior to initiating upgrade. 2. You must be at the command prompt and in the directory that contains the Upgrade File. Example: C:\Axis\2100\2_43> 3. Open an ftp connection to the unit you want to upgrade from a command prompt. (Do not use a "windows" based ftp-program for this, use only command line ftp programs!) 4. Login as root. The default password for the root user is "pass" unless changed by the user. You must be logged in as the root user to flash upgrade the unit. 5. Change to binary transfer mode by typing "bin" and press enter. 6. Type "hash" and press enter. (This will allow you to see how the upgrade progresses) 7. Type the command "put XXX.bin flash" where XXX.bin is replaced by the name of the name of upgrade file you downloaded (and maybe decompressed) from our site, it is typically named 2100_243.bin or axis2100.bin. 8. Wait for the flash load to finish, this may take 1-10 minutes. Always wait at least 10 minutes for the flash upgrade to complete. 9. Your unit will automatically restart using the new firmware. 10. In case the product was running an application, you will need to enable it again. RELEASE 2.43 ============ New in 2.43 =========== 2.43:1 Ftp default only for root 2.43:2 HTTP port in mail if port other then 80 Improvement in 2.43 =================== 2.43:3 Fixed problem with installation wizard 2.43:4 When the AXIS 2100 was set to use G721 audio standard used in earlier releases (G723 is the new default) and multipart HTTP message mode, there was no audio going to or coming from the audio module. This problem is corrected now. 2.43:5 Several issues when using AXIS 2191 audio module have been corrected. 2.43:6 In ftp upload will the @ sign not be used in the temporary file 2.43:7 Image uploads to the FTP server's root ('/' path) are handled correctly now. 2.43:8 Image uploads when using empty FTP path are handled correctly now i.e. the images sent to the FTP server will be uploaded to the user's home directory. 2.43:9 Problem with virtual input fixed 2.43:10 Problem with shttpclient fixed 2.43:11 Possibility to get RFC-compliant response from getparam.cgi with parameter responseformat=rfc 2.43:12 ActiveX updated Application developer / scripting in 2.43 ========================================= The following HTTP API groups are supported by the AXIS 2100. For more information please check the HTTP API document available at www.axis.com. Group Exceptions ===== ========== General Get property Jpeg/Mjpg Audio I/O control PPP Known limitations ================= L1. Up to 350KB of RAM memory is available for pre/post alarm image storage.