FIRMWARE RELEASE NOTES ====================== Products affected: AXIS 209FD/209FD-R Network Camera Release date: 2012-04-11 Release type: Production Firmware version: 4.47.3 File name: 209FD_4_47_3.bin Preceding release: 4.47.2 ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 2.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 4.47.3 ============== Corrections ============= 4.47.3:C01 Motion detection works as expected on rotated images. Known limitations ================= 4.47.3:L01 When using image overlay text during event image upload, using blanks in text will generate hex-value "%20" for blanks. The same applies to other special characters used. These special characters can be added using Plain Config>Event and configuring the specific parameter. 4.47.3:L02 Having a high framerate (10 fps and higher) during event upload might cause less pictures being uploaded than expected. 4.47.3:L03 When configuring privacy masks and pressing test the resolution can be displayed incorrectly compared to the one set in the camera. 4.47.3:L04 When doing event uploading to an ftp server and using date&time in the images will cause the camera stop sending images after a restart of the camera. This problem does not appear if using NTP server. 4.47.3:L05 Image in Motion Detection setup won't be rotated even though camera setting has been made to rotate picture in Live view. 4.47.3:L06 "Setup"-link will always be displayed even though it's disabled in Plain config. 4.47.3:L07 Image overlay Test button will give script error and incorrect window size. 4.47.3:L08 When changing resolution and the uploading an overlay image, moving the overlay image coordinates several times might cause overlay image not to move any more. Changing resolution or restarting camera will solve this. 4.47.3:L09 It's not possible using "/" when configuring image filename during ftp event upload. This means it's not possible creating subfolders by using "/" in the filename. This can be added using Plain Config>Event and configuring the specific parameter. 4.47.3:L10 If adding an event triggered by anything else but 'motion detection'and then decide to modify the existing event and make it triggered by 'Motion Detection' the new drop down lists for available motion windows and the drop down list for 'when motion detection' will contain unexpected characters. Remove the current and add a completely new event. 4.47.3:L11 When enabling both ipv4 and ipv6, then disabling the ipv6, the ipv6 will still be shown under "Current Network Settings" as well as under the "NTP configuration" view. Application Developer Information ================================= The AXIS VAPIX API - Application Programming Interface (available at www.axis.com) is supported by the AXIS 209FD/209FD-R. The following groups are supported by the AXIS 209FD/209FD-R. For more information, please refer to the AXIS VAPIX HTTP API specification version 2, part of the AXIS VAPIX API, available at www.axis.com Group Exceptions ===== ========== General Image and Video Video status Motion Detection IP filter Built in templates for dynamic parameters: Template Group ======== ===== 'event' Event 'ftpaction' Event.E#.Actions 'ftp_config' EventServers.FTP 'httpaction' Event.E#.Actions 'http_config' EventServers.HTTP 'hwaction' Event.E#.Actions 'motion' Motion 'smtpaction' Event.E#.Actions 'tcpaction' Event.E#.Actions 'tcp_config' EventServers.TCP Supported AXIS VAPIX API Image Resolutions: Resolution Exceptions ========== ========== 640x480 480x360 352x288 1) 352x240 1) 320x240 240x180 176x144 1) 176x120 1) 160x120 1) Not equally scaled