NEW SOFTWARE RELEASE ==================== Products involved: AXIS 200+ Release date: 980812 Release type: production Software version: 1.40 Filename: 200p1_40.bin Last preceding releases: 1_31 Flash loading instructions: See http://www.se.axis.com/techsup/cam_servers/howto_upgrade.html --------------------------------------------------------------------- Release 1.40 ================== News in 1.40: N1 Image Wizard A configuration tool for image parameters N2 Image Buffer A user defined image buffer can be created to store a number of images in RAM. This allows to provide series of fast taken images as well as pre-alarm images. N3 New Server Push The Server Push facility has been improved. It is now possible to scale the image and open it in a new window. In addition with the AXIS ActiveX Component Server Push is now working with Microsoft Internet Explorer too. N4 ActiveX ActiveX component to allow various applications to load images from AXIS Camera Servers. (Free download http://www.axis.com/products/camera_servers/) N5 Alert command This command provides the possibility to send user-defined messages to a remote host via TCP. N6 Special camera settings Several configuration parameters for the Sony Camera have been added. N7 Info String A user defined string can be displayed within the image. N8 Generic driver (TCP) for RS232 port Data can be written to and read from the serial port via TCP. Thus a connected device can be controlled from a TCP cliend application. N9 Control relay via snapshot command The relay can be conrolled by using CRON (snapshot command) N10 -temp switch for ftp command Added -temp switch in ftp command to allow specification of a temporary destination. N11 Configuration help N12 Added NTP Solved problems: P1 Modem init string not working P2 Camera Server does not work propperly when accessed via Cisco Router Recommendations: ================ Change to this version.