SOFTWARE RELEASE NOTES
					======================

Application:		AXIS Random Selector

Release date:		2017-08-11

Release type:		Production	      

Software version:	3.12.0	  

File name:		RandomSelector_3_12_0			         

Preceding Release:	3.10.2	 

-------------------------------------------------------------------------------

Contact Information
===================

Please contact Axis Communications for product information, updates and support
at http://www.axis.com.

-------------------------------------------------------------------------------

Compatible products
===================

See complete list of compatible products at www.axis.com.


New Features in 3.12.0 since 3.10.2
=================================
* Added support for M3047-P camera. Steps below must be followed during the installation of the ACAP on the M3047-P camera.
	- Select capture mode ”Dewarp 16:9 25/30fps”
	- Enter System->Orientation and select ”View Areas 1&2” under dewarped view
	- Install application
	- Go to PTZ tab and select ”View Area 1” in the live view
	- Use PTZ to enter the correct position/rotation
	- Save as ”home” by pressing the ”set” icon under ”Preset Positions”
	- When the PTZ is set, restart the app ”Maintenance->Restart Service”
* Added Korean translation.

Corrections in 3.12.0 since 3.10.2
================================
C01: Fixed anonymization.
C02: Updated Chinese and Japanese translation.
C03: Chrome no longer blocks the connection in Master/Slave? live view.

Upload instructions
===================
In the supported product's web interface, go to the Applications menu and upload
this application package. Start and configure the application.
For more instructions see the User Manual at www.axis.com.

Dependencies
============
To install and configure AXIS Random Selector, you must use a supported browser.

Known Bugs/Limitations
================================
K01: If the camera is soft anonymized and the camera's firmware is upgraded the anonymization disappears. However the ACAP will still think that it is anonymized.
K02: Already installed ACAPs during a hard anonymization might leak images. 
		- Solution: Uninstall all other ACAPs before anonymization, in order to make sure that there are no image leaks.
K03: After a soft anonymization the rtsp-port on some cameras can still be changed. In such case the rtsp stream will be visible until the next reboot of the camera.
K04: Master/slave does not work during hard anonymization since we don't know the password.
K05: Master/slave, slave view does not work during soft anonymization.
K06: Anonymization is only supported on firmware 5.70 and above.

Application developer information
=================================
See User manual for available API  www.axis.com/xxxxxx