NEW SOFTWARE RELEASE
                    ====================


Application:       AXIS Digital Autotracking

Release date:      April 14, 2014

Release type:      Production

Software version:  1.1

File name:         AXIS_Digital_Autotracking.eap

Preceding Release: 1.0

--------------------------------------------------------------------------------

Contact Information
===================

Please contact Axis Communications for product information, updates and support
at http://www.axis.com

--------------------------------------------------------------------------------


Upload instructions
===================

In the supported product's web interface, go to the Applications menu and upload
this application package or use latest ACM version. Start and configure the application. 
For more instructions see the User's Guide.


Compatible products
===================

* Axis network cameras and video encoders with support for  
  AXIS Camera Application Platform (ACAP). 
* Product firmware must be 5.50 or later.
* See complete list of compatible products at www.axis.com


Considerations
==============

CO1:  It is not recommended to run AXIS Digital Autotracking at the same time as the
      camera’s built-in motion detection or another Application Packages installed
      in the camera. This may impact behavior and performance of this application.

CO2:  The application will not be compatible with any PTZ products
 
C03:  Make sure that the product firmware is 5.50 or later.

C04:  If changing the view area used by Axis Digital Autotracking, the view area width should not be bigger than half of the width of the maximum resolution.


Application developer information
=================================

See VAPIX AXIS Digital Autotracking API at www.axis.com for more information