FIRMWARE RELEASE NOTE ===================== Products affected: AXIS C1310-E Release date: 2023-01-04 Release type: Production Firmware version: 10.12.138.2 Preceding release: 10.12.119.1 -------------------------------------------------------------------------------- Upgrade instructions ==================== Features in 10.12.138.2 ======================= 10.12.138.2:F1 Updated cURL to version 7.86.0 to increase overall cybersecurity level. 10.12.138.2:F2 Updated OpenSSL to version 1.1.1s to increase the overall cybersecurity level. Corrections in 10.12.138.2 ========================== 10.12.138.2:C1 Corrected an issue which could cause audio clips not to play to completion. 10.12.138.2:C2 Corrected an issue that caused the wrong file size to be reported for recordings larger than 50MB when using FTP. 10.12.138.2:C3 Corrected an issue where ACAP application parameters were reset after firmware upgrade. Features in 10.12.119.1 ======================= AXIS Audio Manager Edge features -------------------------------- 10.12.119.1:F1 The leadership role, configuration and stored content of your AXIS Audio Manager Edge site can now be transferred to another device in the site. 10.12.119.1:F2 Expanded the support for storing multiple schedules to also include advertisements- and announcement schedules. As before, there can only be one active schedule of each type at a time. FW features ----------------- 10.12.119.1:F3 Updated curl to version 7.85.0 to increase overall cybersecurity level. Corrections in 10.12.119.1 ========================== 10.12.119.1:C1 Corrected an issue in AXIS Audio Manager Edge so that "Microphone" can now be selected as intermediary device for a line in paging source. 10.12.119.1:C2 In AXIS Audio Manager Edge, SIP/Vapix Intercom has been renamed to SIP/Vapix Talkback. 10.12.119.1:C3 Removed the pre-configured action events called "Pre-announcement tone: Answer call after incoming call-tone" and "Pre-announcement tone: Play tone on incoming call" from the device configuration web. A detailed step-by-step instruction of how to configure the action events has been added to the device manual. 10.12.119.1:C4 Corrected an issue where events created to mute an audio site could be deleted after restart from the device configuration web. 10.12.119.1:C5 Corrected an issue to make it possible to create certificates with Common Name up to 64 characters. 10.12.119.1:C6 Corrected an issue that could cause O3C client to be disconnected due to exhausted resources. Known limitations ================= 10.12.138.2:L1 With Milestone and Genetec the G711 codec is not working correctly on products with the i.MX 6SoloX processor. The problem will be corrected shortly. Applies to: C8210, C8110, C1210-E, C1211-E, C1510, C1511. 10.12.138.2:L2 From FW version 10.12.66.1 and onwards AXIS Audio Manager Pro v3.3 is not supported. FW upgrade will fail if AXIS Audio Manager Pro 3.3 ACAP is found on the device. Users are advised to upgrade to AXIS Audio Manager Pro v4.0 or later version before upgrading the device. To continue using AXIS Audio Manager Pro 3.3 you should change firmware to 9.80 long-term support (LTS) track. 10.12.138.2:L3 There is currently no support for PEM certificates when using TLS authentication in AXIS Audio Manager Edge. 10.12.138.2:L4 If the user tries to add more than 40 devices at the same time in AXIS Audio Manager Edge the system might fail to add all devices. The user can still try again and add the remaining devices in one or more sessions.