FIRMWARE RELEASE NOTE
======================

Products affected: AXIS A8004-VE

Release date:      2024-07-10

Release type:      Production

Firmware version:  1.65.13

Preceding release: 1.65.12

--------------------------------------------------------------------------------

This is the LTS-2016 track.

Upgrade instructions
====================

Upgrade the firmware according to the instructions given at
https://www.axis.com/ca/en/support/technical-notes/how-to-upgrade 
or howtoupgrade.txt, which is included in the firmware folder.

NOTE
====================

For latest information about Axis Cybersecurity, see
https://www.axis.com/se/sv/support/product-security.



Corrections in 1.65.13 since 1.65.12
=======================================

1.65.13:C01
Updated Apache to version 2.4.58 to increase the overall cybersecurity level.

1.65.13:C02
Multiple SIP improvements.


Known Bugs/Limitations
======================

1.65.13:L1
Due to the updating of OpenSSL to version 1.1.1g to increase overall cybersecurity level. 
AXIS QR scanner application version 1.9-10 or older used with AXIS Visitor Access will no longer be supported and needs to upgrade to the latest version.
Latest available version can be found here: https://www.axis.com/products/axis-visitor-access

1.65.13:L2
It's recommended to factory default the unit before making a downgrade if
needed.

1.65.13:L3
When using mp3 files with other samplerates than the native 16kHz
performance might suffer and delays be introduced.

1.65.13:L4
As action rules holds copies of recipient information independentally of the
Recipient configuration, it is possible to call a SIP recipient using an action
rule despite the recipient is removed in the Recipent configuration.

To prevent this, one must remove the recipient from the action rule too.

1.65.13:L5
It is not possible to send both RFC2388 and RFC2976 DTMFs through Asterisk at
the same time.

This limitation can be avoided by using one of RFC 2388 or RFC 2976. It can also
be avoided by using Asterisk to transcode into RFC 2976.

1.65.13:L6
Denied access does not show in access log (System Options>Support>Logs and
Reports>Access Log)

1.65.13:L7
When the device is facing up or down, tilt tampering detection fuctionality does
not work optimally and may generate events often even though the device is
not moved or tilted.
(The gravity does not effect the two axis normally used for the tilt detection
making it sensitive to noise)


NOTE
========================

For latest information about Axis Cybersecurity, see:
https://www.axis.com/support/product-security

Supported AXIS VAPIX API Image Resolutions for AXIS A8004-VE
================================================================================

Resolution  Exceptions
==========  ==========

1280x960
1280x720
1024x768
1024x640
800x600
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
176x144
160x120
160x100
160x90

1400x1050   1)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface