Daisy-chain connections.

When initializing the PTZ-units, a "Device ID" will be assign to each connected unit in the daisy-chain. The first unit in the chain will get "Device ID" 1, the second unit will get "Device ID" 2 and so on.

A power fail on some of the units in the daisy-chain will interrupt the communication with all the following units in the daisy-chain. When the power is back again, a re-initialization is required to be able to communicate with the units again. When changing the connection order of the units on the daisy-chain, a re-initialization is required to assign "Device ID" to each unit. After a re-initialization of the daisy-chain, the mapping of Video sources and "Device ID" have to be checked and updated. The preset positions may also need to be verified.

An initialization of the daisy-chain can be made by restarting the camera server or by changing the mapping of the video sources or by changing "Device ID" in the configuration.

 
NU-700 preset with manual iris (autoiris=off)
After change of NU700 shutter speed or gain parameters (see below), presets with manual iris might need to be adjusted.  
NU-700 preset with manual iris
The auxiliary cgi-request accepts the following strings:

wiper
Perform one operation with the wiper
shutter={0,1,2,4}
Sets the shutter speed, only available when iris is under manual control. (autoiris=off)
PAL
NTSC
0
1/50
1/60
1
1/25
1/30
2
1/12
1/15
4
1/6
1/8
gain={0,1,2,3}
Sets the gain, only available when iris is under manual control. (autoiris=off)
Parameter
Gain
0
0 dB
1
6 dB
2
12 dB
3
18 dB
colorbar=[on|off]
Activates/deactives colorbar test picture.
ndfilter=[on|off]
Activates/deactivates ndfilter.
 
Video Source Configuration
Parameter Description Range
Device ID This is the address of the connected device. Since the PTZ-units operates in a daisy-chain configuration the first unit in the chain will have Device ID 1, the second unit will have Device ID 2 and so on. 1-9
 
Driver Specific Settings
There are no driver specific settings for this driver.  
Mechanical limits
Movement Limits Minimal value Maximal value Comment
Left -100 100 Limits for VC-C4
Right -100 100
Up 90 -30
Down 90 -30
Left -169 169 Limits for VC-C4R
Right -169 169
Up 10 -90
Down 10 -90
Left -100 100 Limits for VC-C50i
Right -100 100
Up 90 -30
Down 90 -30
Left -169 169 Limits for VC-C50iR
Right -169 169
Up 10 -90
Down 10 -90
Left -169 169 Limits for NU-700N/P
Right -169 169
Up 30 -49
Down 30 -49
Zoom Limits      
Zoom wide 1 9999 VC-C4
VC-C5
Zoom tele 1 9999
Zoom wide 1 19999 NU-700
Zoom tele 1 19999
Focus Limits      
Focus near 1 9999   
Focus far 1 9999
Optical Data      
Min. field angle 1 50 Not used.
Max. field angle 1 50
 
Light Control
Parameter Description Range
Back light compensation Set to true to use the back light compensation. true, false
 
Extended Driver Specific Settings
Parameter Description Range
Move speed The current maximum pan and tilt speed. 1-100
Goto preset delay Time (in seconds) it takes for the image to stabilize it self, after the camera has performed the longest "goto preset action". Used for disabling/enabling image analysis (e.g. motion detection). 0-100
NU700 shutter speed Only used for NU-700. Sets the shutter speed, only available when iris is under manual control. (autoiris=off) {0,1,2,4}
NU700 gain Only used for NU-700. Sets the gain, only available when iris is under manual control. (autoiris=off) {0,1,2,3}