FIRMWARE RELEASE NOTES ====================== Products affected: AXIS Q6032-C PTZ Dome Network Camera Release date: 2017-10-11 Release type: Production Firmware version: 5.41.3.3 File name: Q6032-C_5_41_3_3.bin Preceding release: 5.41.3.2 -------------------------------------------------------------------------------- UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. Corrections in 5.41.3.3 since 5.41.3.2 ====================================== 5.41.3.3:C01 Corrected critical vulnerability ACV-120444. Known Bugs/Limitations ====================== 5.41.3.3:L01 In PAL version, a black vertical line with several pixels wide is visible at the right edge of the image. It is not possible to remove with the X offset parameter. 5.41.3.3:L02 Maximum brightness will not result in a white image. 5.41.3.3:L03 Auto tracking might be confused when the IR cut filter is turned on/off. 5.41.3.3:L04 Pan/tilt coordinate directions presented in the text overlay (#x #y) will not be rotated along with the image when rotation is 180. 5.41.3.3:L05 The NTP implementation will not synchronize to NTP servers that signal an alarm condition (clock not synchronized) in its Leap Indicator. 5.41.3.3:L06 After changing the date/time of the camera, the video stream will stop after 60 seconds with an RTSP session time out. It does not matter if the media stream is started before or after the time is changed. Workaround: Reboot the camera after the time has been changed manually or by NTP. 5.41.3.3:L07 There is no boundary check when entering a motion detection window name. If the name is more than 1024 charachters long, the parhand application may restart. 5.41.3.3:L08 If RTSP authentication is switched off, streaming H.264 with QuickTime and other Apple compatible clients will not work as they require authentication of the RTSP, but do not allow HTTP authentication. 5.41.3.3:L09 AXIS Media Control client may stop displaying the H.264 video stream after the PC has been locked. Workaround: Reload the Live View page. 5.41.3.3:L10 When setting up a guardtour with Random view order it will ignore Pause between runs. 5.41.3.3:L11 Bitmap images have more contrast than the corresponding JPEG images. 5.41.3.3:L12 Not possible to perform JPEG/BMP requests with aspect ratio resolutions. 5.41.3.3:L13 Color parameter has no effect when pulling RTSP stream with color=0. 5.41.3.3:L14 Stream profile names are limited to alphanumerical characters. 5.41.3.3:L15 Frame Size Control does not affect size of the snapshot taken with the upper right control that can be added to the Live View. 5.41.3.3:L16 Constant bit rate might fluctuate more than 10%. 5.41.3.3:L17 Events triggered at the same time, will by default settings share the same filename. This may result in upload of corrupted image. 5.41.3.3:L18 Automatic IR Cut Filter will not work if Auto Iris is off. 5.41.3.3:L20 Check and repair is only available if the file system is ext4. 5.41.3.3:L21 When using action rule resulting in short recordings, it is recommended to extend post-event time. 5.41.3.3:L22 Date modifiers "%m-%d-%Y" are not formatted correctly when used with folder name, SMTP subject and message. 5.41.3.3:L23 When snapshot is taken during live view with frame rate and bandwidth values enabled as text overlay, the values are shown as 0 in the snapshot. This happens for H.264 stream. 5.41.3.3:L24 Some versions of Chrome requires a manual refresh of webpage to show newly created privacy masks and exclude areas. 5.41.3.3:L25 On some Windows 7 PC's IP Utility doesn't show the DUT when using IPv6. 5.41.3.3:L26 Expired or not yet valid client certificates will be uploaded successfully instead of being rejected. 5.41.3.3:L27 Issue with an uploaded bitmap overlay which was made partially transparent unconditionally. 5.41.3.3:L28 DVM Honeywell generates criticals when accessing a camera during the boot sequence. 5.41.3.3:L29 When requesting a videostream using video.cgi, the parameter color=0 will not result in a black&white image. 5.41.3.3:L30 Privacy masks needs to be removed and recreated if capture mode is changed. Application Developer Information ================================= The AXIS VAPIX Application Programming Interface version 3 is supported by this product. For more information, please refer to the AXIS VAPIX HTTP API specification version 3 part of the AXIS VAPIX API available at www.axis.com. Supported AXIS VAPIX API Image Resolutions Resolution Exceptions ========== ========== Extended D1 736x576 1) 752x480 2) D1 720x480 1) 720x576 2) 4CIF 704x576 1) 704x480 2) 768x576 1) 3) 640x480 2) 3) 2CIF 704x288 1) 704x240 2) 768x288 1) 3) 640x240 2) 3) CIF 352x288 1) 352x240 2) 384x288 1) 3) 320x240 2) 3) QCIF 176x144 1) 176x120 2) 192x144 1) 3) 160x120 2) 3) 1) Only available for PAL 2) Only available for NTSC 3) Not visible in web user interface 90/270 degress rotation is not supported.