FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS Q3505-V/-VE

Release date:      2016-11-08

Release type:      Production

Firmware version:  6.30.1.2

File name:         Q3505_6_30_1_2.bin

Preceding release: 6.30.1.1

--------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Corrections in 6.30.1.2 since 6.30.1.1
======================================

6.30.1.2:C01
Fix recordings when monolith respawns.

6.30.1.2:C02
Fix timestamp for recording older than 48 hours. Fix high memory usage which may occur after 168h of runtime.

6.30.1.2:C03
Use SHA2 for self signed certificates and signing requests.

6.30.1.2:C04
Fix stability in camera when using TUN/TAP devices.

6.30.1.2:C05
Possible to adjust temporal noise filter with the help of an ACAP.

6.30.1.2:C06
Fixes to make people counter work.

6.30.1.2:C07
Fix action rule that enables/disables WDR or defog mode.

6.30.1.2:C08
Improved overall camera stability when handling unstable network environments or streaming clients.

6.30.1.2:C09
Fix for ONVIF digest authentication failures (401 error).

6.30.1.2:C10
Onvif conformance.

6.30.1.2:C11
Fixed security vulnerability CVE-2016-5195.

6.30.1.2:C12
ZipStream performance improvements: dynamic search area load calculation fix.

6.30.1.2:C13
ZipStream performance improvements: lower H.264 p-skip threshold to reduce artifacts and pumping.


Known Bugs/Limitations
======================

6.30.1.2:L1
The status LED is unlit during the boot-up sequence and then goes steady green
when system is ready.

6.30.1.2:L2
RTSP over TCP may cause choppy video if block size is not optimized or set
during video connection.

6.30.1.2:L3
Recording streams to SD card with a total bit rate above 12Mbit/sec may cause
missing frames/sequences.

6.30.1.2:L4
Text modifiers #x #y #z #Z #L do not work for upload file/folder names,
TCP/HTTP notification text or e-mail  subject/message.

6.30.1.2:L5
When downgrading to an older firmware, the root password might be changed back
to its default password.

6.30.1.2:L6
Capture mode change might require a camera restart to get full FoV.

6.30.1.2:L7
Using identical start and stop time for a scheduled event will never trigger an
event.

6.30.1.2:L8
Some special UTF-8 characters can not be used for privacy mask names.


Supported AXIS VAPIX API Image Resolutions for AXIS Q3505-V/-VE
===============================================================

Resolution  Exceptions
==========  ==========

1920x1200   5)
1920x1080   3) 4)
1600x1200   5)
1400x1050   3) 4) 5)
1280x960    3) 4) 5)
1280x800    3) 4) 5)
1280x720
1024x768
1024x640
800x600
854x480
800x500
800x450
640x480
640x400
640x360
480x360
480x300
480x270
320x240
320x200
320x180
240x180
160x120
160x100
160x90

2560x1440   1) 3) 4) 6) 7)
768x576     1)
720x576     1)
704x576     1)
704x480     1)
704x288     1)
704x240     1)
384x288     1)
352x288     1)
352x240     1)
240x135     1)
192x144     1)
176x144     1)
176x120     1)
80x50       1)

1) Not visible in web user interface
2) Available for Overview view
3) 1080p 1920x1080 (16:9) @ 25/30 fps (WDR)
4) 1080p 1920x1080 (16:9) @ 50/60 fps (no WDR)
5) WUXGA 1920x1200 (16:10) @ 25/30 fps (no WDR)
6) 720p 1280x720 (16:9) @ 25/30 fps (WDR)
7) 720p 1280x720 (16:9) @ 50/60 fps (no WDR)