FIRMWARE RELEASE NOTES ====================== Products affected: AXIS P7701 Network Video Decoder Release date: 2010-09-01 Release type: Production Firmware version: 5.07.3 File name: P7701_5_07_3.bin Preceding release: 5.07.2 AMC version: n/a ------------------------------------------------------------------------------ UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management 3.0, HTTP or FTP. Please follow the instructions from the user's manual, the web page at http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named howtoupgrade.txt. RELEASE 5.07.3 ============== New features in 5.07.3 since 5.07.2 =================================== 5.07.3:F01 Possible to disabling the OSD messages via 4 parameters found in the decoder group: - Alarm : OSD messages about incoming alarms - Idle : OSD messages shown when the decoder is idle - Info : OSD messages shown during normal operation - Status : OSD messages showing error and unusual conditions. Corrections in 5.07.2 since 5.07.3 ================================== 5.07.3:C01 Solved a auto detect problem 5.07.3:c02 Solved video lost probem Known limitations ================= 5.07:L01 Input resolution can be scaled a maximum of 4 times up or down. 5.07:L02 Mega-pixel Motion JPEG over RTP is not supported 5.07:L03 No audio with AAC+MJPEG+HTTP 5.07:L04 MPEG4 will give bad performance in high bitrate, over 1 Mbit/s 5.07:L05 RTSP HTTP tunneling protocol is not supported from video source 5.11 or earlier 5.07:L07 Adding/Importing 200 encoders takes long time 5.07:L08 G.726 audio is not supported over HTTP from video source with firmware 5.00/5.01 5.07:L09 Password handling of special characters Application Developer Information ================================= The AXIS P7701 supports AXIS VAPIX API - Application Programming Interface version 3. Backwards compatibility is maintained as far as possible, but some changes have been necessary. Group Action ===== ========== Encoder.E#.Info Removed Encoder.E# Updated Network.Info.DHCP Removed Decoder Updated Built in templates for dynamic parameters: Template Group ======== ===== 'encoder_grp' Encoder.E# Supported AXIS VAPIX API Image Resolutions for decoding: Input Resolution Exceptions ================ ========== 3MP* - D1 JPEG only D1 - 160x120 All resolutions * 3MP being the biggest verified resolution, larger may work.