PTZ DRIVER RELEASE NOTES
                 ========================

Release date: 2020-10-02

Release type: Production

Firmware version: 4.05

Filename: Kalatel-4.05-armv7-3_62-5_1.ptz

---------------------------------------------------------------------

Release 4.05:
=============

4.05:1 Added support for OSD-menu and auxiliary cgi-commands
       (with some limitations, see below).


Known problems and limitations in version 4.05
==============================================

Note! Some limitations are also device type dependent and can behave
      different on different Kalatel devices!

4.05:2 To use this version of the driver, firmware 5.20 or higher
       is required, or for AXIS Q7401 firmware 5.20.2 or higher is required.

4.05:3 On some Kalatel devices, when clicking on the iris bar,
       the iris may toggle between "auto-iris" and fully open iris.

4.05:4 Some auxiliary cgi-commands may be required to navigate inside the
       OSD-menues.

4.05:5 This ptz-driver use the "Kalatel ASCII Protocol". Many Kalatel
       ptz-units require a Kalatel Computer-Interface or Data-Converter
       to use this ptz-driver/ptz-protocol.

4.05:6 If a Kalatel Computer-Interface or Data-Converter is required, verify
       that the serial interface match the serial interface on the
       video-encoder.