FIRMWARE RELEASE NOTES
                        ======================

Products affected: AXIS M3203 Fixed Dome Network Camera

Release date:      2011-02-18

Release type:      Production

Firmware version:  5.12.1

File name:         M3203_5_12_1.bin

Preceding release: 5.12

AMC version:	   5.6.2.11-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named 
howtoupgrade.txt.


RELEASE 5.12.1
==============

Corrected problems
==================

5.12.1:C01: SPS/PPS data available in the H264 stream.

5.12.1:C02: Trigger data available in the H264 stream.

Known limitations
=================

5.12.1:L01 If the status LED is set to flash when a video stream is accessed, the
           flashing stops after an AVHS dispatch. The flashing begins again if a
           new stream is accessed (e.g. if the live view is reloaded).

5.12.1:L02 Streaming of MJPEG over rtsp sometimes does not work for resolutions
           higher than 1024x768 in windows media player and mplayer.
           Workaround: Use VLC instead http://www.videolan.org/.

5.12.1:L03 Multicast for ipv6 will only work if ipv4 is enabled.

5.12.1:L04 Application upload does not work when using Google Chrome.


Application Developer Information
=================================

The AXIS VAPIX Application Programming Interface version3 is supported by AXIS M3203.

The following groups are supported by M3203.
For more information, please refer to the AXIS VAPIX HTTP API specification 
version 3, part of the AXIS VAPIX API, available at www.axis.com.

Group             Exceptions
=====             ==========
General
Image and Video   Video status
Motion Detection
IP filter
PTZ               PTZ driver update
                  PTZ administation
                  Set PTZ parameters
                  PTZ control queue

Built in templates for dynamic parameters are:

Template         Group
========         =====
'button'                 PTZ.Auxiliary.A1.Button
'customexposurewindow'   ImageSource.I#.Sensor
'event'                  Event
'ftpaction'              Event.E#.Actions
'ftp_config'             EventServers.FTP
'guardtour'              GuardTour
'guardtouraction'        Event.E#.Actions
'httpaction'             Event.E#.Actions
'http_config'            EventServers.HTTP
'hwaction'               Event.E#.Actions
'motion'                 Motion
'position'               PTZ.Preset.P0.Position
'ptzaction'              Event.E#.Actions
'smtpaction'             Event.E#.Actions
'streamcache'            StreamCache
'streamprofile'          StreamProfile
'tcpaction'              Event.E#.Actions
'tcp_config'             Eventservers.TCP
'tour'                   GuardTour.G#.Tour

Supported AXIS VAPIX API Image Resolutions for M3203

Resolution  Exceptions
==========  ==========

800x600
800x450
640x480
640x360
480x360
480x270
320x240
320x180
240x180
176x144
160x120
160x90

800x500     1)
768x576     1)
704x576     1)
704x480     1)
704x240     1)
640x400     1)
480x300     1)
384x288     1)
352x288     1)
352x240     1)
320x200     1)
192x144     1)
176x120     1)
160x100     1)

1) Not visible in web user interface