FIRMWARE RELEASE NOTE ======================== Products affected: M3077-PLVE Release date: 2021-04-28 Release type: Production Firmware version: 10.5.2 Preceding release: 10.5.0 -------------------------------------------------------------------------------- Upgrade recommendations ======================== When updating the device, it is recommended to do an intermediate upgrade using an available AXIS OS LTS-release on the way to the desired AXIS OS version. For example, if the device currently is running AXIS OS 7.40 and you want to upgrade to the latest AXIS OS Active Track (Example: 10.1, October 2020) then you should do the upgrade in these steps: 7.40 => 8.40 LTS => 9.80 LTS => 10.1. More detailed recommendations can be found in the AXIS OS portal at https://www.axis.com/support/firmware. Upgrade the firmware according to the instructions given in howtoupgrade.txt, which is included in the firmware folder or according to instructions at https://www.axis.com/support/firmware. NOTE ======================== For latest information about Axis Cybersecurity, see: https://www.axis.com/support/product-security Features in 10.5.0 ================================================================================ 10.5.0:F1 RTSP and HTTP stream URL:s now allow for filtering overlays based on overlay type. This is done by setting 'overlays=' in the URL (only one value). 10.5.0:F2 Updated pjsip to version 2.10 to increase overall cyber security. 10.5.0:F3 OpenSSL upgraded to 1.1.1j to fix CVE-2021-23841 and CVE-2021-23840. 10.4.0:F1 Added support for new action "Publish MQTT", available in the web-interface in Events -> Device events -> Rules setup. This new action allows to publish MQTT messages with custom topic and payload. 10.4.0:F2 Added feature for automatic dimming of individual IR-LEDs to optimize image quality in situations where camera is placed close to a wall or a corner. 10.4.0:F3 Added possibility to select which source should be shown by default in the web interface. To set, go to Settings -> System -> Plain config -> Layout -> Live view video, and select the number for the source. 10.4.0:F4 Successful and failed user login attempts are now logged in detail when the Access Log parameter is enabled from Plain Config -> System -> Access Log 10.4.0:F5 OpenSSL upgraded to 1.1.1i to fix CVE-2020-1971. 10.3.0:F1 MQTT is now activated by default upon power loss or reboot if MQTT was enabled prior to it. 10.3.0:F2 Trigger Data functionality has been removed. Support for Trigger Data will continue on 9.80 LTS. 10.3.0:F3 Added possibility to set a wear level for the SD card that the event system can trigger on. This is set in the Storage page. 10.3.0:F4 SD card wear level is now displayed on the Storage page if the SD card supports this feature. 10.3.0:F5 Added support for audit logging when a user exports video from the device's edge recording (SD card, network share). 10.3.0:F6 Updated OpenSSL to version 1.1.1h to increase overall minimum cyber security level. 10.3.0:F7 Updated Video Motion Detection to version 4.4.9. 10.3.0:F8 Updated Fence Guard to version 2.2.8. 10.3.0:F9 Updated Loitering Guard to version 2.2.8. Corrections in 10.5.2 ================================================================================ 10.5.2:C1 Corrected an issue that on some occasions prevented an upgrade to firmware version 10.5.0. 10.5.2:C2 Corrected an issue that could cause O3C-based connections with the device to be interrupted. Corrections in 10.5.0 ================================================================================ 10.5.0:C1 Increased the number of allowed characters for event condition name to 512. 10.5.0:C2 Corrected an issue that prevented the use of some special characters in ONVIF passwords. 10.5.0:C3 Corrected an issue that prevented the Axis device to respond with HTTP 403 Forbidden when the source-ip address was blocked when using PreventDOSAttack in Plain Config -> System. Previously HTTP 401 Unauthorized was returned. 10.4.0:C1 Corrected an issue that erased the password from the MQTT broker connection settings when editing settings occasionally. This required the user to re-enter the password when this happened. 10.4.0:C2 Corrected an issue that caused the MQTT configuration in the device to get corrupt on rare occasions. 10.4.0:C3 Corrected an issue that could caused an MQTT event to be duplicated upon registering the same event multiple times. 10.4.0:C4 Updated digital input LogicalState metadata API to consistently use 0/1 on all camera models. 10.4.0:C5 Corrected an issue that caused the device to send an EPRT command when transferring an image or video via FTP instead of an EPSV command. 10.4.0:C6 Corrected an issue where a network share used as a recipient could get its properties overwritten by another network share created from the Storage page. 10.4.0:C7 Corrected nice names for the PreventDoSAttack parameters in Settings -> System -> Plain Config-> System -> PreventDoSAttack. 10.4.0:C8 Improved Link Layer Discovery Protocol (LLDP) system stability. 10.4.0:C9 Corrected response for NTP API version. 10.3.3:C1 Fixed the camera booting issue when the cover top is off. 10.3.2:C1 Corrected an issue where gain got higher value when toggling AGC on/off. 10.3.0:C1 Corrected an issue that caused video clients to not display a low-FPS video stream due to missing base FPS info in VUI timing info. 10.3.0:C2 Corrected an issue that prevented setting the gain individually on the left and right channel on products with stereo audio input. 10.3.0:C3 Corrected an issue that caused PKCS#12-formatted certificate uploads to fail when certain special characters were used as a password. 10.3.0:C4 Corrected text for time offset in the Date & Time web page, the offset is now shown in milliseconds instead of seconds. 10.3.0:C5 Corrected an issue with pause-frame handling that could cause network disconnections if pause-frames were enabled and used in the network. 10.3.0:C6 Corrected an issue that prevented the device to utilize the available network bandwidth in high-latency networks such as 4G cellular network. 10.3.0:C7 Corrected an issue that caused the audio transfer over HTTPS to not work properly and with that, the audio-gain-level behavior was also reverted back to the state it was known in AXIS OS releases up to AXIS OS 10.0.2. It is therefore mandatory to upgrade to AXIS OS 10.3 when experiencing audio-related issues on Axis devices running on AXIS OS 10.1 and 10.2. Upon release of AXIS OS 10.3, AXIS OS 10.1 and 10.2 will be made unavailable for download from www.axis.com moving forward. 10.3.0:C8 Improved video streaming stability in multi-stream- and ONVIF Audio Backchannel scenarios. 10.3.0:C9 Corrected an issue that caused the value of Quality of Service (QoS) to not be respected in always multicast mode. 10.3.0:C10 Corrected an issue that prevented the device to stream in always-multicast mode after the video stream processing has been restarted. Known Bugs/Limitations ================================================================================ 10.2.2:L1 No video for FPS lower than 14 during incoming/outgoing call to a softphone. 10.2.2:L2 Whitebalance and exposure custom boxes resize improperly when the digital roll is used. 10.2.2:L3 The image quality is degraded for incoming calls from registered accounts. 10.2.2:L4 Digital roll does not correctly load in Firefox. 10.2.2:L5 After changing quad view order a couple of times, only one view is displayed. Refresh the page to get the correct views. 10.2.2:L6 Outgoing call for a registered account for TLS transport method is not working properly. 10.2.2:L7 Audio encoding AAC with a bitrate below 16 kbps is not supported when stereo is enabled. Supported AXIS VAPIX API Image Resolutions for M3077-PLVE ================================================================================ Resolution Exceptions Capture mode ------------ ------------------------------ -------------- 2560x1920 4) 5) 10) 11) 2560x1440 3) 4) 5) 10) 11) 2560x960 3) 11) 2560x720 3) 11) 2432x1824 4) 5) 10) 11) 2368x1184 7) 8) 11) 2304x1728 4) 5) 10) 11) 2304x1296 3) 4) 5) 10) 11) 2304x864 3) 7) 8) 11) 2304x648 3) 11) 2048x1536 4) 5) 10) 11) 2048x1152 3) 4) 5) 10) 11) 2048x576 3) 11) 2016x2016 2) 9) 11) 12) 1920x1920 2) 9) 11) 12) 1920x1440 4) 5) 6) 9) 10) 11) 1920x1080 6) 11) 1920x720 3) 7) 8) 11) 1792x1344 4) 5) 9) 11) 1728x1728 2) 9) 11) 12) 1728x1296 6) 10) 11) 1728x648 3) 7) 8) 11) 1600x1200 4) 5) 6) 9) 10) 11) 1600x600 3) 7) 8) 11) 1440x1440 2) 9) 11) 12) 1280x1280 2) 11) 12) 1280x720 3) 4) 5) 6) 10) 11) 1280x480 3) 7) 8) 11) 1280x360 3) 11) 1200x1200 2) 11) 12) 1024x768 4) 5) 6) 9) 10) 11) 1024x576 3) 4) 5) 6) 10) 11) 960x720 4) 5) 6) 9) 10) 11) 960x360 3) 7) 8) 11) 800x800 2) 11) 12) 768x576 4) 5) 6) 9) 10) 11) 768x288 3) 7) 8) 11) 720x720 2) 11) 12) 640x640 2) 9) 11) 12) 640x480 4) 5) 6) 9) 10) 11) 640x240 3) 7) 8) 11) 512x288 4) 5) 11) 480x480 2) 9) 11) 12) 384x288 4) 5) 6) 9) 10) 11) 384x144 3) 7) 8) 11) 320x320 2) 11) 12) 320x240 6) 10) 11) 320x120 3) 7) 8) 11) 256x192 4) 5) 9) 11) 256x144 3) 6) 10) 11) 240x240 2) 11) 12) 192x72 3) 7) 8) 11) 160x160 2) 11) 12) 1024x768 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 1) Not visible in web user interface 2) Available for Overview view 3) Available for Panorama view 4) Available for Double Panorama view 5) Available for Quad view 6) Available for View area 7) Available for Corner Left view 8) Available for Corner Right view 9) Available for Double Corner view 10) Available for Corridor view 11) 360° overview @ 30/25 fps dewarped views WDR 12) 360° overview only @ 60/50 fps no WDR