FIRMWARE RELEASE NOTES
          ======================

Products affected: AXIS M3004 Network Camera

Release date:      2014-05-06

Release type:      Production

Firmware version:  5.40.5.6

File name:         M3004_5_40_5_6.bin

Preceding release: M3004_5_40_5_5.bin

AMC version:       6.0.6.4-1

------------------------------------------------------------------------------

UPGRADE INSTRUCTIONS
====================

The firmware can be upgraded using Axis Camera Management, HTTP or FTP.
Please follow the instructions from the user's manual, the web page at
http://www.axis.com/techsup/cam_servers/how_to_upgrade.htm or the file named
howtoupgrade.txt.


Improvements in 5.40.5.6 since 5.40.5.5
=======================================

5.40.5.6:I01 Improved stability.

5.40.5.6:I02 Fixed a motion detection memory leak.

5.40.5.6:I03 Removed ACAP's 10-parameter limit.

5.40.5.6:I04 Dynamic overlay is now working.

5.40.5.6:I05 VMD works properly now.


Known Bugs/Limitations
======================

5.40.5:L01 Removing and reinserting SD card during recording is not recommendable.

5.40.5:L02 Check and repair is only available if the file system is ext4.

5.40.5:L03 A combination of a high bandwidth continuous recording and a lot
	   of small recordings can result in disc full. The automatic clean up will
	   stop at that point and the user has to manually remove recordings.

5.40.5:L04 It's not possible to download recordings bigger than 4GB from the system.

5.40.5:L05 Using modifiers like %c in a network share upload event does not work.

5.40.5:L06 Moving a view area doesn't always work as expected.

5.40.5:L07 It's not possible to trigger action rules based on temperature.

5.40.5:L08 Multiple simultaneous recordings to SD cards and network shares
	   can degrade the performance of the system.

5.40.5:L09 Video stream becomes unaccessible while downloading crash report

5.40.5:L10 DSCP value for Event/Alarm over IPv4 is always 0

5.40.5:L11 Changing DSCP values might prompt for password

5.40.5:L12 Privacy mask can't be added in Chrome

5.40.5:L13 Video attributes might not be applied after a reboot

5.40.5:L14 Zoom bar is disabled until using zoom buttons

5.40.5:L15 Number of different configured video streams are limited by hardware.

5.40.5:L16 The JPEG images with a rsolution which is not a multiple of 16/8 
	   (width/height) will be truncated to the nearest value. For example if you 
	   request an image with 800x450 resolution then you will get 800x448.


APPLICATION DEVELOPER Information
=================================

The AXIS VAPIX Application Programming Interface version 3 is supported by this product.
For more information please refer to the AXIS VAPIX HTTP API specification
version 3 part of the AXIS VAPIX API available at www.axis.com.


Supported AXIS VAPIX API Image Resolutions for AXIS M3004.

Resolution  Exceptions
==========  ==========
1280x800
1280x720
1024x640
800x600
640x480
640x400
640x360
480x360
352x240
320x240

1440x900    1)
1024x768    1)
768x576     1)
704x480     1)
384x288     1)
352x288     1)

1) Not visible in web user interface