FIRMWARE RELEASE NOTE ====================== Products affected: M1143-L and M1144-L Release date: 2018-08-10 Release type: Production Firmware version: 5.60.1.11 Preceding release: 5.60.1.10 -------------------------------------------------------------------------------- Upgrade instructions ==================== Upgrade the firmware according to the instructions given at https://www.axis.com/ca/en/support/tecnical-notes/how-to-upgrade or howtoupgrade.txt, which is included in the firmware folder. NOTE ==================== For latest information about Axis Cybersecurity, see https://www.axis.com/se/sv/support/product-security. Corrections in 5.60.1.11 since 5.60.1.10 ========================================= 5.60.1.11:C01 Telnet support is removed to increase overall minimum cyber security level. SSH (Secure Shell) is a secure alternative and it can be enabled via System Options> Advanced> Plain Config> Network> SSH Enabled. Corrections in 5.60.1.10 since 5.60.1.9 ======================================= 5.60.1.10:C01 Updated R2 GlobalSign Root Certificate to version 20170717. 5.60.1.10:C02 Corrected an issue that let the camera become unresponsive in rare occasions when connected to an AVHS system. 5.60.1.10:C03 Corrected critical vulnerability ACV-128401. Known Bugs/Limitations ====================== 5.60.1.11:L01 When the automatic IR cut filter enables/disables the IR cut filter, it may trigger motion detection. 5.60.1.11:L02 Automatic IR Cut Filter will not work if Auto Iris is off. 5.60.1.11:L03 Recording streams to SD Card with a total bit rate above 12Mbit/sec may cause missing frames/sequences. 5.60.1.11:L04 90 and 270 rotation can cause a drop in frame rate. 5.60.1.11:L05 If max gain is set to a low value, e.g. 0, the IR cut filter may not switch back on automatically. 5.60.1.11:L06 To avoid corrupt recordings, it is recommended to unmount the SD Card before ejecting it. 5.60.1.11:L07 Private keys need to be in a PKCS#1 format in order to function when installing Certificates. 5.60.1.11:L08 For low contrast scenes, false positives or negatives may occur because there is not enough information for the Tampering alarm. 5.60.1.11:L09 The ipv6.class field will have the same value in all IPv6 packages. The class field value depends on the value of the DSCP setting. 5.60.1.11:L10 Reboot is necessary after enabling SOCKS. 5.60.1.11:L11 When changing active https-certificate, the device needs to be restarted before it becomes active. 5.60.1.11:L12 When upgrading to the firmware 5.60, the Edge Storage database might take a couple of minutes to migrate to the new database system. Make sure to not remove power or SD card during the first few minutes after upgrading the device. Edge Storage recordings used with 5.60 products will not show recordings when downgraded to previous firmware. The recordings will however still be present on the card but not accessible. 5.60.1.11:L13 Time modifiers used in the field "Create folder" is only used upon activation of the rule, hence no new folders are created with the current time during an active rule. To have new folders created with time modifiers you should add them in the "Base filename". 5.60.1.11:L14 Depending on the capture mode selected and used resolution privacy mask marking may be slightly moved when saving the settings. 5.60.1.11:L15 Longer connection disruptions towards the Network storage during playback of a recording from the Network storage may affect the possibilities to setup new video streaming also some time after reconnection. Ongoing live streaming will not be affected. 5.60.1.11:L16 The possibility to control individual streams in an aggregate session is removed. This means that a client that starts an RTSP session which includes both audio and video will not be able to pause only one of the medias while the other keeps streaming. If the client needs to do this then it must set up two separate RTSP sessions, one for the audio and one for the video. 5.60.1.11:L17 To be able to seek in exported mkv recordings you need to use AXIS Matroska File Splitter, see axis.com. Files are playable both with and without AXIS Matroska File Splitter. 5.60.1.11:L18 If setting the video stream resolution to an unsupported value it's not possible to start streaming without specifying a valid resolution or correcting the video stream resolution to a supported resolution. 5.60.1.11:L19 SNMP OID that have been set are not kept after reboot. Supported AXIS VAPIX API Image Resolutions for AXIS M1143-L and M1144-L ======================================================================= Resolution Exceptions ========== ========== 1280x800 2) 1280x720 2) 1024x640 2) 800x600 640x480 640x400 640x360 480x360 352x240 320x240 1440x900 1) 2) 1024x768 1) 2) 768x576 1) 704x576 1) 704x480 1) 384x288 1) 352x288 1) 1) Not visible in web user interface 2) Only on M1144-L