NEW SOFTWARE RELEASE
                          ====================

          Products involved: AXIS 240

          Release date: 980817

          Release type: production

          Software version: 1.10

          Filename: 2401_10.bin

          Last preceding
          releases:  1.02     


          Flash loading
          instructions:  See http://www.se.axis.com/techsup/cam_servers/howto_upgrade.html

          ---------------------------------------------------------------------

          Release 1.10
          ==================

          News in 1.10:

          N1 Videmech Driver
             Added support for Videmech PAN/TILT devices 

          N2 Generic driver TCP
             Data can be written to and read from the serial PAN/TILT port via TCP.
             Thus a connected device can be controlled from a TCP client application

          N3 Image Buffer
             A user defined image buffer can be created to store a number of images in RAM.
             This allows to provide series of fast taken images as well as pre-alarm images. 

          N4 Alert command
             This command provides the possibility to send user-defined messages to a remote
             host via TCP 

          N5 ActiveX
             ActiveX component to allow various applications to
             load images from AXIS camera servers. For instance IE users now can continuously 
             load images simelar to the only by Netscape supported Server Push

          N6 Info String
             A user defined string can be displayed within the image

          N7 No video detection
             If no video signal exists on an enabled input an image with an error message
             is displayed

          N8 Control relay via snapshot command
             The relay can be controlled by using CRON (snapshot command)
     
          N9 Preset position
             
          N10 View Angle Restriction 
             
          N11 Server Push can be opened in new window

          N12 Added NTP 
         
          Solved Problems:

          P1 Modem init string not working

          

          Known problems and limitations:

          L1 PTZ-control is not working with Netscape for Macintosh

          L2 View angle restrection and preset position is only working for PTZ cameras
             with absolute control

          L3 Use AXIS ActiveX Component v1.01 or higher             
          
          L4 The values in the View Angle Settings page is set to max 
             if the camera server is restarted. The view angle restriction
             works however with the stored values.
          


          Recommendations:
          ================

          Change to this version