FIRMWARE UPGRADE INSTRUCTIONS ============================= Products affected: AXIS 231D AXIS 232D AXIS 231D+ AXIS 232D+ Firmware version: 4.40 UPGRADE INSTRUCTIONS ==================== The firmware can be upgraded using Axis Camera Management, HTTP or FTP. Axis Camera Management 2.0 ========================== 1. Download the upgrade file to a directory that is accessible from your local computer. 2. In AXIS Camera Management select the units of the product model that you want to upgrade. 3. Select 'Maintenance | Upgrade Firmware...'. The dialog shows a list of camera models and, if you expand the list, you can see the current firmware version installed in each device. 4. Choose '<Select> | Browse...' to locate the new firmware version stored on your hard drive. 5. Click OK to start upgrading the devices. For more information see help in Axis Camera Management. HTTP ==== 1. Download the upgrade file to a directory that is accessible from your local computer. 2. Go to the product's start page (e.g. http://192.168.0.90). 3. Click the Setup link and log in as root (or any other user with Administrator privileges) if you are prompted for a user name and password. You must be logged in as an Administrator to upgrade the unit. 4. Click System Options in the menu to the left. 5. Click Maintenance. 6. Click the Browse button in the Upgrade Server section. 7. Select the upgrade file you downloaded (and maybe decompressed) from our site. This file could be named 231_4_40.bin or axis232dp.bin (depending on product model). 8. Click the Open button. 9. Click the Upgrade button in the Upgrade Server section. 10. Wait for the flash load to complete, which may take 1-10 minutes. The upgrade procedure is in four steps: Step 1, Shut down: Running applications are shut down and active connections are terminated. Step 2, Uploading firmware: The old firmware will be erased and the new firmware will be saved. After a while the progress of the upgrade will be displayed in the web browser. Step 3, Reboot: The system restarts automatically. Step 4, Reconfiguration: The new firmware settings are configured to match the previous settings. 11. After the upgrade has completed, the unit will automatically initiate the system. FTP === 1. You must be at the command prompt and in the directory that contains the upgrade file. Example: C:\Axis> 2. From the command prompt, open an FTP connection to the unit you wish to upgrade. (Do not use a "Windows" based FTP-program to do this, use only command line FTP programs!) 3. Log in as root. The default password for the root user is "pass", unless this has been changed by the user. You must be logged in as the root user to upgrade the unit. 4. Change to binary transfer mode by typing "bin" and press enter. 5. Type "hash" and press enter. (This will allow you to see how the upgrade progresses) 6. Type the command "put XXX.bin flash" where XXX.bin is the name of the upgrade file you downloaded (and maybe decompressed) from our site. 7. Wait for the flash load to complete, which may take 1-10 minutes. The upgrade procedure is in four steps: Step 1, Shut down: Running applications are shut down and active connections are terminated. Step 2, Uploading firmware: The old firmware will be erased and the new firmware will be saved. Step 3, Reboot: The FTP session terminates and the system restarts automatically. Step 4, Reconfiguration: The new firmware settings are configured to match the previous settings. 8. After the upgrade has completed, the unit will automatically initiate the system.