NEW SOFTWARE RELEASE ==================== Products involved: AXIS Media Control Embedded Release date: July 1, 2009 Release type: Production Software version: 5.6.2.4 File name(s): AxisMediaControlEmb.dll Supported OS: Microsoft Windows 2000, 2003 Server, XP Professional, Vista and 2008 Server. Use latest Service Packs. Preceding release: 5.4.17.21 RELEASE 5.6.2.4 ================= Corrections =========== C01 Fixed problem with hanging AMC related to "Input Volume Msg Wnd" not responding. C02 AMC now restarts the stream after the screen has been locked/unlocked. C03 Fixed sometimes occurring hang when starting a recording while using the RTSP/RTP protocol. C04 Fixed problem with AMC freezes when the receive buffer is full (RTP). AMC now always stops when this buffer is full. C05 The audio stream was not started correctly when running audio without video. This has now been fixed. C06 Fixed problem with trashed image in H.264 using image widths not dividable by 16 (i.e. 450x800). C07 Fixed problem with the same BMP-image beeing returned from GetCurrentImage when the movie window lost focus. C08 Improved volume slider responsiveness. New Features ============ F01 Motion JPEG over RTP/RTSP F02 Motion detection windows displays the window id together with the name. F03 Added error message when saving Motion Detection configuration failed. F04 Added option in Control Panel to enable/disable deblocking filter for MPEG-4. F05 Added option in Control Panel to specify decoding quality for H.264. F06 Added option in Control Panel to allow frame dropping in decoder (default) for MPEG-4/H.264. F07 Added possibility to select audio input source (default: Microphone) from Control Panel. F08 Snapshots are aspect ratio corrected. F09 Support for receiving video and audio from different RTSP servers. Modifications ============= M01 Added a possibility to use a very small playout buffer (small delay) when running MJPEG ('Min'). 'Medium' is now equal to the old 'Min' option (stil default). M02 The RTP buffer max size has been reduced. M03 Asf-recordings includes aspect ratio to always give correct proportions at playback. M04 AMC requires version 2.1.1.0 or higher of the MPEG-4 decoder. M05 Fullscreen background color is now black on default. M06 Audio clock is now used for media stream synchronization instead of CPU clock as before. RELEASE 5.4.17.21 ================= Corrections =========== C01 Fix to prevent stuttering image in video only recordings on slower PCs. C02 Fixed crash when trying to receive AAC audio over http without having AAC decoder installed. C03 Improvments in RTCP implementation which prevents stuttering in live view video. C04 Fixed problem with hanging AMC on repeated recording using RTP/RTSP protocol. C05 Fixed problem with audio receive playout (HTTP) buffer. Modifications ============= M01 Disabled transparency effect on motion detection configuration windows due to performance issue. M02 Audio toggle/push/secrecy buttons now unmutes the designated audio channel. RELEASE 5.4.17.5 ================ Corrections =========== C01 Fixed problem with transmitting audio to older servers. Modifications ============= M01 Supports new G7xx MIME types. RELEASE 5.4.17.4 =============== Corrections =========== C01 Fixed problem with Motion Detection using multiple video sources. C02 The red PTZ vector is now working after a play/stop in MPEG-4. C03 Fixed problem with missing error messages in motion detection configuration. C04 Fixed audio quality problem when transmitting G726 24kbits/s. C05 General improvements for audio transmission. C06 Fixed fullscreen problem when using same resolution on desktop and camera. C07 Fixed an error when encoding the IPv6 URL. C08 Fixed problem with recording MPEG-4 in Vista + protected mode on. C09 Fixed an issue where stop would sometimes hang for about 20 seconds. C10 A couple of problems using joystick have been fixed. New Features ============ F01 H.264 video support F02 RTCP support F03 Audio/Video playout buffer for RTP streaming (see MPEG-4 and H.264 tab). F04 Audio transmission over HTTPS F05 Added possibility to configure mouse wheel sensitivity when zooming. F06 The error message "Could not write to recording file" will be shown if the disk is full. F07 Enable Overlays checkbox is available in Mpeg4 and H264. F08 Ctrl+Shift+S show statistics from AMC in separate window (AMC must have focus). Modifications ============= M01 Changed "No Video!" to "Video stopped!" to avoid misinterpretation. INSTALLATION INSTRUCTIONS ========================= Please follow the instructions from the user's manual, available at http://www.axis.com/techsup/amc/ or the file named howtoinstall_AMC.txt. RELEASE 5.2.13.12 ================ Corrections =========== C01 Using mouse wheel for zooming in and out should now work properly. C02 Fullscreen on secondary monitor fixed. C03 Fixed scaling problem for overlays in MPEG-4. New Features ============ F01 Overlay functionality is also supported for the VMR7 renderer (Advanced Rendering disabled in MPEG-4). Modifications ============= M01 MD configuration now handles "åäö" and other "unsafe characters". M02 Changed "No Video!" to "Video stopped!" to avoid misinterpretation. M03 The video stream is now centered when the viewing window is larger than video dimensions. RELEASE 5.2.11.0 ================ New Features ============= F01 AMC core functionality rewritten for higher stability and performance. F02 Supports digest authentication. F03 Middle button click now zooms out. Modifications ============= M01 Snapshot and recording folders are no longer opened per default. M02 Windowless rendering for MPEG-4 and other DirectShow based media types M03 It is now possible to take snapshot and enter/exit fullscreen while stopped. Known limitations ================= L01 When browsing in the control panel for a snapshot/recording folder, certain invalid folders (e.g. \\{server}) may appear for selection. However, as these are not valid selections, they will not appear in the edit box. L02 In MPEG-2 products, if the video resolution is set to 2CIF, any snapshots taken will have half the specified height. L03 Date and time overlay text shown when playing MPEG-2 files may be hard to read, depending on the color scale of the video being shown. L04 The client may stop displaying the MPEG-4 video stream after the PC has been locked. Workaround: Reload the Live View page. L05 If the toolbar is not correctly updated, please reload the Live View page and check your server audio connection if this does not help. L06 It is only possible to view recorded mjpeg-streams if an appropriate mjpeg-decoder has been installed. L07 Taking a snapshot or recording a stream when having the option "Open folder in backgound" enabled will cause the browser to lose focus and joysticks to give up control over AMC. L08 When reconnecting after having lost a multicast stream, AMC will only test the multicast protocol, regardless of protocol settings.