NEW SOFTWARE RELEASE
                    ====================


Application:       AXIS Video Motion Detection (VMD)

Release date:      2024-01-29

Release type:      Production

Software version:  4.5.8

Preceding Release: 4.5.7

Onvif support:     Motion Alarm Event
                   Motion Region Configuration

--------------------------------------------------------------------------------

Contact Information
===================
Please contact Axis Communications for product information, updates and support
at www.axis.com

--------------------------------------------------------------------------------

Compatible Products
===================
See complete list of compatible products at www.axis.com


Installation Instructions
=========================
In the product's web interface, go to the Applications menu and install
the corresponding application package. Start the application.
For more instructions see the product's User Manual at www.axis.com
Preferred browsers for the configuration web page are latest version of Google Chrome and Firefox.


Upgrade Instructions
====================
In the product's web interface, go to the Applications menu. Remove any old versions of the
AXIS VMD ACAP running, then upload and start the new one. Note: AXIS Video Motion Detection 4
does not replace AXIS Video Motion Detection 2 or 3 when installed. Unless AXIS Video Motion Detection
2 and 3 are removed manually, all applications will be available in the camera.


New Features in 4.5.8 since 4.5.7
=================================
Minor bug fix.


Dependencies
============
Properties.API.HTTP.Version=3
Properties.EmbeddedDevelopment.Version=2.13
Required Firmware Version 7.10 or later


Known Bugs/Limitations
======================
L01: Objects moving straight towards the camera take longer time to be detected.

L02: It is not possible to create an action rule connected to the VMD 3 trigger if both VMD 3 and VMD 4 both
     are running. Since both applications can produce this trigger.

L03: In a Pan/Tilt/Zoom product the analytics engine is restarted with each change of preset position.
     Therefore, it is recommended to wait at least 10 seconds before changing preset position.

L04: Enabling visual confirmation may introduce video latency and due to increased CPU-load may affect
     analytic behavior negatively.

L05: The application is performance demanding and thus it is highly recommended to ensure that the camera
     is not exstensively loaded, especially when running other analytic applications at the same time.

L06: It is not recommended to run AXIS Video Motion Detection at the same time as the cameras built-in
     motion detection or other Analytic ACAPs. This may impact behavior and performance of this application.

L07: If the cameras capture mode is changed during setup, the camera must be restarted for visual confirmation
     to work correctly.

L08: Visual confirmation in the configuration page requires that the browser can connect an rtsp-stream
     over websockets. This requires that the network / proxy settings do not stop this connection.
     Support for an rtsp-stream over websockets requires an updated browser.

L09: Some products will trigger on objects behind privacy masks. To avoid this, exclude areas need to be added.

L10: The "xinternal" event is an internal event used within the application.

L11: Include/exclude areas that are behind other areas are selected by clicking the corresponding eye-icon.

L12: CameraANY events are only produced on multi channel devices.

Application Developer Information
=================================
See VAPIX AXIS Video Motion Detection API available from Axis Partner Pages www.axis.com/partner.